Krell Industries KSA 150 / 250 用户手册

下载
页码 7
 
2
A.  GENERAL INFORMATION 
 
The latest generation of high-resolution source components and speakers places 
new demands on the power amplifier. The Krell KSA 150 and KSA-250 meet 
these challenges with fresh design sophistication and long-term value. Both 
products can drive any speaker with an effortless quality that makes their power 
seem endless. Extreme clarity is maintained at all power levels. They both utilize 
Krell refined high-bias Class A and direct-coupled circuitry from input to output. 
Their power supplies and output stages are massive. High voltage rails with 
extensive regulation are provided for the input circuitry. All materials and 
electronic components are of the finest quality and operate within their optimum 
performance ranges. Virtually all hand wiring has been eliminated, resulting in a 
dramatic improvement in sonic clarity. 
 
The KSA-150 and KSA-250 both utilize Class A circuitry throughout the audio 
and power supply regulation stages. Class A gain stages deliver excellent sonic 
performance under diverse conditions because all active components are   
turned on at all times. This allows each component to operate in its most linear 
and precise regions. The amplifiers are able to respond to the full range of input 
signals with equal accuracy.  
 
The KSA-150 and the KSA-250 are conservatively rated at 150 and 250 watts 
per channel into 8 ohms, respectively. The 150 will actually generate 220 watts 
into 8 ohms, and the 250 will generate 320 watts into 8 ohms. The 8-ohm power 
ratings do not account for the amplifiers superb sonic performance nor describe 
their maximum power. The Krell definition of power and the ability to drive low 
impedances is that the output must double into successively low impedances. 
The immense power supplies in both products allow them to double their power 
into one ohm. 
 
There are many advances in thermal construction and control circuitry in the  
KSA -150 and KSA -250. All heat bearing structural components and external 
heat sinks have been designed in-house to improve thermal tracking and cooling. 
This construction provides very low thermal resistance between the output 
transistors and the heat sinks, resulting in superior thermal tracking. It also 
results in a considerable reduction in overall size. Greater amplifier life 
expectancy is an added design benefit.   
 
Automatic self-adjusting bias and DC offset control circuitry have been developed 
for the KSA-150 and the KSA-250. These circuits compel the amplifiers to 
conform to their intended operational parameters under all AC mains conditions. 
A variation of approximately 10% in the AC can generally be accommodated, 
guaranteeing consistent performance in all environments. 
 
The KSA-150 and KSA-250 are protected by a series of opto-coupled, non-
intrusive circuits that constantly evaluate the amplifiers operation.  Appropriate