Knoll Systems MR216 产品宣传页
Warranty
Knoll Systems warrants the MR216 sold in the USA and Canada by
authorized Knoll dealers to be free of defects in materials and
workmanship. This warranty extends for three full years from the date of
purchase by the original consumer. Any products returned to Knoll
Systems and found to be defective by Knoll Systems within the warranty
period will be repaired or replaced at Knoll Systems option, at no charge.
Knoll Systems will not be responsible for the actual cost of installation or
removal of the product, nor for any incidental or consequential damages.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation may not apply to you.
This warranty gives you specific legal rights. You may have additional
legal rights that vary from state-to-state.
authorized Knoll dealers to be free of defects in materials and
workmanship. This warranty extends for three full years from the date of
purchase by the original consumer. Any products returned to Knoll
Systems and found to be defective by Knoll Systems within the warranty
period will be repaired or replaced at Knoll Systems option, at no charge.
Knoll Systems will not be responsible for the actual cost of installation or
removal of the product, nor for any incidental or consequential damages.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation may not apply to you.
This warranty gives you specific legal rights. You may have additional
legal rights that vary from state-to-state.
Specifications
Trigger Signal
12 VDC 150 mA maximum
Color
Black
Power Requirements
100-240 VAC 50/60 Hz
Power Connector
2.1mm center positive
Dimensions
2-1/2 x 1 x 2-5/8”
(63 x 26 x 67 mm)
(63 x 26 x 67 mm)
Audio Connectors
Gold RCA Inputs and Outputs
Trigger Connector
Mono 3.5mm
Knoll Systems
145 Tyee Drive Point Roberts, WA 98281 USA
14-7163 Vantage Way, Delta BC V4G 1N1 Canada
Tel: (604) 940-1689, fax (855) 734-3363
14-7163 Vantage Way, Delta BC V4G 1N1 Canada
Tel: (604) 940-1689, fax (855) 734-3363
MR216
Eco-System™ Trigger
Instructions v1.0
Warning: To be installed and/or used in accordance with appropriate
electrical codes and regulations.
Description: The Knoll Systems MR216 Eco-System™ Trigger allows
amplifiers, subwoofers and other products to be activated or powered
on when an audio signal is present. When the audio signal is lost the
activation is stopped.
on when an audio signal is present. When the audio signal is lost the
activation is stopped.
The most important feature of the Eco-System™ circuit in the MR216
is the energy or electrical savings that is delivered to the owner over
a period of time. The typical home owner will see a savings of
hundreds of dollars or more per year in actual electrical costs and
that can be multiplied when taking into account the increased costs
of air conditioning the home to extract unwanted heat produced by a
products powered up and not in use.
a period of time. The typical home owner will see a savings of
hundreds of dollars or more per year in actual electrical costs and
that can be multiplied when taking into account the increased costs
of air conditioning the home to extract unwanted heat produced by a
products powered up and not in use.