Perreaux 6160/P 用户手册

Caution! When in bridged mode, loudspeaker cables must be connected directly

from the amplifier to the loudspeakers. DO NOT connect to a speaker

switch, headphone adapter, or any other device that shares a common

ground between channels

àConnect the signal lead from the desired source to the bridged input. In

this instance, the bridged input for channels 5&6 is input 5.

Note: Do not connect anything to input 6.

Input 1 and input 3 are to be used if bridging other channels.

àReconnect the mains power supply to your 6160, and turn the power

switch ON.

Note: When in bridged mode, we recommend that the loudspeakers have a

nominal impedance no less than 8Ω.