Transcend Information 2.5 IDE 用户手册
9
Connecting to a Computer
If you want to use the StoreJet
™
2.5 as an External Hard Disk Drive to upload/download data to, or from
your computer you will need to connect it to a USB port on the computer using the provided .
Figure 7. Mini USB to USB A-Type Cable (USB Y cable)
1.
Plug the small end of the USB Y cable into the Mini USB port on the StoreJet
™
2.5.
2.
Plug the large end of the cable into an available USB port on your desktop, or notebook computer.
＊
On some older computers, the power supplied by the USB port is below the required 5V DC power. In
this instance, please connect the other USB A-Type connector from the provided USB Y cable to
another USB port on the computer. This will provide the additional power necessary to run the drive.
another USB port on the computer. This will provide the additional power necessary to run the drive.
Figure 8. Connecting to a Computer
Use with a Computer
Small End
Large End
Extra USB connector used to provide additional power