Niles Audio GS4 用户手册
5
4
WWW.NILESAUDIO.COM
NILES AUDIO – 1-800-BUY-HIFI – 1-760-710-0992
ConneCting the Loudspeaker
NOTE: All lOudspEAkEr cONNEcTiONs musT bE mAdE wiTh ThE AmplifiEr TurNEd Off
fOr sAfETy.
fOr sAfETy.
All cables run outdoors or buried should be properly certified for such use. If you
have any questions regarding which cable is appropriate for your installation, please
consult with a professional. Make certain that there are no obstructions in the
planned wiring location before proceeding. Many states and municipalities have
specific notification requirements before digging. Make sure to check with your
local building authorities as required prior to digging.
Connect the wire from the amplifier to your loudspeaker making sure to match
polarity so that the negative wire from the amplifier (normally black) matches with
the negative wire from the loudspeaker and do the same with the positive wires.
Final connections should be made with either silicone filled wire connectors, or the
appropriate junction boxes.
After all loudspeaker connections have been made, connect the wires to your
amplifier and power on your amplifier. Verify the satisfactory performance of each
loudspeaker before covering any exposed trenches or conduit used for your wiring.
have any questions regarding which cable is appropriate for your installation, please
consult with a professional. Make certain that there are no obstructions in the
planned wiring location before proceeding. Many states and municipalities have
specific notification requirements before digging. Make sure to check with your
local building authorities as required prior to digging.
Connect the wire from the amplifier to your loudspeaker making sure to match
polarity so that the negative wire from the amplifier (normally black) matches with
the negative wire from the loudspeaker and do the same with the positive wires.
Final connections should be made with either silicone filled wire connectors, or the
appropriate junction boxes.
After all loudspeaker connections have been made, connect the wires to your
amplifier and power on your amplifier. Verify the satisfactory performance of each
loudspeaker before covering any exposed trenches or conduit used for your wiring.
speCifiCations
Tweeter:
1” Wide Dispersion Soft Dome
Woofer:
4”
Mineral-Filled
Polypropylene
Recommended Amplifier Power: 10-110 watts
Frequency Response:
Frequency Response:
70Hz to 21kHz +/- 3dB
Product Weight:
4 lbs (1.8 kg)
gs4 features
• Custom designed, UV-resistant acoustic enclosure
• 4” Mineral-Filled Polypropylene Woofer for long-lasting performance with deep,
• 4” Mineral-Filled Polypropylene Woofer for long-lasting performance with deep,
rich sound.
• 1” Teteron
®
tweeter with ultra-wide dispersion to maximize the sound quality in an
outdoor environment
• Dual mounting options (included): stake mounted for in-ground use, wall-mount
bracket to attach against any flat surface
• Weatherproof design assures reliable performance outdoors
• UV-Resistant connection cables with waterproof wire-nuts to ensure trouble free,
• UV-Resistant connection cables with waterproof wire-nuts to ensure trouble free,
long-lasting connections.
2-conductor direct burial cable at the following sizes depending on the longest
length of cable required:
length of cable required:
Wire Gauge
Maximum Length
16
60 ft (18 m)
14
100 ft (30 m)
12
160 ft (50 m)
temperature extremes
-50°F to 185°F (-45° to 85° Celsius)
produCt dimensions
10-3/4” H x 5-1/2” W x 9” D (27.3 cm x 14 cm x 22.9 cm)
produCt Weight
4lbs (1.8 kg)
Wiring requirements
[
16.7 cm
]
6.592”
[
23.4 cm
]
9.233”
[
26.1 cm
]
10.284”
[
14.0 cm
]
5.527”
9901210-RevA-GS4-SpkManual.indd 4-5
12/9/11 9:29 AM