Music Hall Marimba 用户手册

下载
页码 5
 
Running in 
Your new speakers require a little gentle use to allow their working components 
to settle into their proper working condition.  Do not be concerned if your new 
speakers sound aggressive or lacking in bass.  The sound will quickly improve 
after 48 hours of use. 
 
Fine-tuning 
Before fine-tuning make sure that all the connections in the installation are 
correct and secure and that the speaker has been fully run in.   
 
Removing the protective speaker grills will provide a clearer more focused sound. 
Moving the speakers from the wall will reduce the general level of bass.  Space 
behind the speakers also helps to create an impression of depth.  Conversely, 
moving the speakers closer to the walls will increase the level of bass. 
 
If the bass is uneven with frequency it is usually due to the excitation of 
resonance modes in the room.  Even small changes in the position of the 
speakers or the listeners can have a profound effect on how these resonances 
affect the sound.  Try mounting the speakers the speakers along a different wall.  
Even large pieces of furniture can have an effect. 
 
If the central image is poor, try moving the speakers closer together or toeing 
them in so they point just in front of the listeners.  
 
If the sound is too harsh, increase the amount of soft furnishings in the room.  
Heavier curtains may help.  Or reduce the amount of soft furnishings is the 
sound is too dull. 
 
 
Technical Specifications 
Power handling: 75 watts 
Frequency Range: 50hz – 35kHz 
Impedance: 6Ohm nominal 
Sensitivity: 87dB (1w/1m) 
Crossover Frequency: 2.6kHz 
Recommended Amplifier Rating: 20 – 75 watts 
 
Physical 
Dimensions: W x D x H (6.6 x 8.7 x 11.0 in.) (167 x 221 x 279mm) 
Tweeter Type: 1in. (25mm) silk dome with Neodymium magnet 
Woofer Type: 5.25in. (133mm) polypropylene cone, steel chassis, shielded 
Cabinet: 5/8in. (15mm) MDF w/CARB 11 certificate 
Weight: 17.2lbs/pr.  (7.8kg)  
Gross Weight: 19.8lbs/pr (9kg)