Dynaudio SUB 600 用户手册
26
Dynaudio Sub 600
OPTIMIZING SETTINGS/TROUBLESHOOTING
Cross-over frequencies set correctly
Subwoofer and main speakers are perfectly matched, when the combined frequency
response is smooth without bumps and gaps. A neutral sound will be the result.
response is smooth without bumps and gaps. A neutral sound will be the result.
Subwoofer too low, main speakers too high
A gap in the frequency response occurs, if the cut-off frequency of the subwoofer is set
too low and of the main speakers too high (or if the main speakers are not able to
reproduce low frequencies accordingly). In this acoustic hole you will miss some signal
information and experience a thin bass sound.
too low and of the main speakers too high (or if the main speakers are not able to
reproduce low frequencies accordingly). In this acoustic hole you will miss some signal
information and experience a thin bass sound.
Subwoofer too high, main speakers too low
In the other case you will experience unnatural and bloated bass sound, if the overlapping
area is too large. The combined frequency response shows a bump, as the sound
pressure levels in this area are increased.
area is too large. The combined frequency response shows a bump, as the sound
pressure levels in this area are increased.
Le
v
el
Combined frequency response
Subwoofer
Main speakers
Subwoofer
Main speakers
Frequency
Le
v
el
Combined frequency response
Subwoofer
Main speakers
Subwoofer
Main speakers
Frequency
L
e
vel
Combined frequency response
Subwoofer
Main speakers
Subwoofer
Main speakers
Frequency