TIC TFS12 用户手册

Problem 

Please Check 

No Sound 

 

Check the speakers are connected to the cable 
correctly. 

 

Check the speaker cable is connected to the receiver 
amplifier correctly. 

 

Check the receiver amplifier is powered “on” at the 
mains, is not on “mute”, has no headphones attached 
and that the Channels used for the exterior speakers 
(usually A or B) is in operation. 

 

Refer to the owners guide that came with your 
receiver amplifier. 

 

Most initial problems are connectivity, please try a 
different connection cable to your outdoor speakers 
or equipment

.  

No Sound from one 
speaker 

 

Check the “balance” control on your receiver 
amplifier. 

 

Check all connections and cable to the inoperable 
speaker. 

 

1. Disconnect the “working” speaker from the 
receiver amplifier connection/ channel. Switch the 
cord from the non-operating speaker from its current 
connection to the “working” speaker connection. If 
the speaker now works the problem is your receiver 
amplifier. 

 

2. Reconnect as original. Remove the speaker cable 
at the “working” speaker directly and connect it 
directly to the non-working speaker. If the speaker 
now works the problem is somewhere in the original 
speaker cable. 

 

3. If the speaker still does not work the problem is the 
speaker.  

One speaker sounds 
distorted, lower 
volume or “different”

   

Follow same procedure as above for “No Sound”.  

Treble or Bass  

 

Check the “tone” setting on your receiver amplifier. 

 

Adjust the Treble and Bass settings on your receiver 
amplifier. 

 

Check the connections carefully from the amplifier to 
your speakers and ensure correct Phase (+ to + and 
– to – accordingly). Poor sound replication is 
expected from a speakers or speakers out of polarity 
or phase.