Rocketfish RF-TRSPIPAD 产品宣传页
ENGLISH 11-1135
LED blinks red and green alternately when
no connection is established. Speaker
goes into sleep mode after 3 minutes, and
LED turns off.
Note: Please make sure to disconnect
(unpair) the RF-TRSPIPAD speakers from
your iPad before attempting to pair your
speakers with another Bluetooth device.
no connection is established. Speaker
goes into sleep mode after 3 minutes, and
LED turns off.
Note: Please make sure to disconnect
(unpair) the RF-TRSPIPAD speakers from
your iPad before attempting to pair your
speakers with another Bluetooth device.
Reset
When pairing is not established after 3
minutes repeat the “turning on” sequence,
by first pushing in the side of the speaker
unit with the power on icon.
minutes repeat the “turning on” sequence,
by first pushing in the side of the speaker
unit with the power on icon.
Enjoying your speakers
To enjoy your music or videos, place your
iPad 2 with speakers in either orientation
indicated.
iPad 2 with speakers in either orientation
indicated.
LED indicators
Charge status
Full Charge indicator: Green LED
Charge not Full: Blinking Red LED
Full Charge indicator: Green LED
Charge not Full: Blinking Red LED
Pairing status
Connection: Constant Green LED
No Connection: LED blinking alternately red
and green
Out of range: Constant Red LED
Connection: Constant Green LED
No Connection: LED blinking alternately red
and green
Out of range: Constant Red LED
Legal notice
FCC and IC information (English version)
This device complies with Part 15 of the FCC
Rules and Industry license-exempt RSS
standard(s). Operation is subject to the
following two conditions: (1) this device may
not cause interference, and (2) this device
must accept any interference, including
interference that may cause undesired
operation of the device.
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instruc-
tions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in
a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more of
the following measure:
This device complies with Part 15 of the FCC
Rules and Industry license-exempt RSS
standard(s). Operation is subject to the
following two conditions: (1) this device may
not cause interference, and (2) this device
must accept any interference, including
interference that may cause undesired
operation of the device.
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instruc-
tions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in
a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more of
the following measure:
- Reorient or relocate the receiving antenna
- Increase the separation between the
- Increase the separation between the
equipment and receiver.
- Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
receiver is connected.
- Consult the dealer or an experienced
radio/TV technician for help.
This equipment complies with IC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be
installed and operated with minimum
distance 20 cm between the radiator and
your body.
Warning: Changes or modifications not
expressly approved by the party responsible
for compliance could void the user’s
authority to operate the equipment.
exposure limits set forth for an uncontrolled
environment. This equipment should be
installed and operated with minimum
distance 20 cm between the radiator and
your body.
Warning: Changes or modifications not
expressly approved by the party responsible
for compliance could void the user’s
authority to operate the equipment.
One-year limited warranty
Visit www.rocketfishproducts.com for
details.
details.
Contact Rocketfish:
For customer service, call 1-800-620-2790
www.rocketfishproducts.com
www.rocketfishproducts.com
© 2011 BBY Solutions, Inc. All Rights Reserved.
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN USA 55423-3645
ROCKETFISH is a trademark of BBY Solutions, Inc. All other
products and brand names are trademarks of their
respective owners.
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN USA 55423-3645
ROCKETFISH is a trademark of BBY Solutions, Inc. All other
products and brand names are trademarks of their
respective owners.