JVC UX-G66 用户手册
![JVC](https://files.manualsbrain.com/attachments/5a164373f8011a1a722bf4f4e2a525689656bbe7/common/fit/150/50/49632231f75d09f0c41422c0d8935c786899406d6105204c6d7c8b00c0b3/brand_logo.jpeg)
31
Troubleshooting
If you are having a problem with your system, check this list for a possible solution before calling for service.
If you cannot solve the problem from the hints given here, or the units has been physically damaged, call a qualified
person, such as your dealer, for service.
If you cannot solve the problem from the hints given here, or the units has been physically damaged, call a qualified
person, such as your dealer, for service.
Symptom
No sound is heard.
Poor radio reception.
Unable to record onto a tape.
The CD skips.
Unable to operate using the remote
control.
control.
Loaded CD and tape cannot be
ejected.
ejected.
The CD does not play.
Operations are disabled.
Possible Cause
•
Connections are incorrect, or
loose.
loose.
•
Headphones are connected.
•
Volume level is set to “– –”.
•
The antenna is not connected
correctly.
correctly.
•
The AM loop antenna is too close
to the units.
to the units.
•
The FM antenna is not properly
extended and positioned.
extended and positioned.
•
The AM radio noise interferes
with tape recording.
with tape recording.
•
You are using a tape without a
protect tab.
protect tab.
•
Tape-type detection slots are
covered by foreign matters.
covered by foreign matters.
•
The CD is dirty or scratched.
•
The path between the remote
control and the remote sensor on
the front panel is blocked.
control and the remote sensor on
the front panel is blocked.
•
The batteries have lost their
charge.
charge.
•
The main AC power cord is not
plugged in.
plugged in.
•
The system is under the recording
operations.
operations.
•
The CD is upside down.
•
The built-in microprocessor has
malfunctioned due to external
electrical interference.
malfunctioned due to external
electrical interference.
Action
•
Check all connections and make
corrections (see pages 6 – 9).
corrections (see pages 6 – 9).
•
Disconnect the headphones (see
page 12).
page 12).
•
Adjust the volume again (see
page 11).
page 11).
•
Reconnect the antenna securely.
•
Change the position and direction
of the AM loop antenna.
of the AM loop antenna.
•
Extend FM antenna to the best
reception position (see page 7).
reception position (see page 7).
•
Set the BEk1 eu7 TD(control and tmT]TJfere -1-1.5TJ1.5713 TD0.002 Tw(page tape recor)Tj-1.573 23w BX /GS171.18 558.28 m512.9 454.24 lSBT9 0 0 9 227.66 443.2 Tm512.9 4 gs EX0 Tw[(•)-1210(Y)109(ou areositordoheirfor)6)]TJ1hol1.56 adhesiwer their