JVC ME-EX90 用户手册
50
CA-EX90
Amplifier/tuner (RX-EX90)
Output Power
20 watts per channel, min. RMS, both channels
driven, into 6 ohms from 70 Hz to 20 kHz, with
no more than 0.9% total harmonic distortion.
driven, into 6 ohms from 70 Hz to 20 kHz, with
no more than 0.9% total harmonic distortion.
Total Harmonic Distortion (6 ohms, 1kHz)
0.08% at 14 watts output (* Measured by JVC
Audio Analysis System)
Audio Analysis System)
Audio Input Sensitivity/Impedance (1 kHz)
CD, MD
260 mV/49 kohms
TAPE
290 mV/54 kohms
AUX
370 mV/49 kohms
Audio output level/ Impedance (1 kHz)
TAPE, MD
TAPE, MD
210 mV/400 ohms
SUB-WOOFER OUT
1.8 V/1 kohm
Speaker terminals
Impedance
6 – 16 ohms
Tuner Section
FM Tuner
Tuning Range
87.5 – 108.0 MHz
AM Tuner
Tuning Range
530 – 1,710 kHz
General
Dimensions
200
×
80
×
323.4 mm (W/H/D)
(7-7/8
×
3-3/16
×
12-3/4 inches)
Mass
3.3 kg (7.3 lbs)
Power Specifications
Power Requirements
AC 120 V
, 60 Hz
Power Consumption
48 watts (at operation)
13 watts (in standby mode)
13 watts (in standby mode)
Subwoofer amplifier (ME-EX90)
Output Power
30 watts per channel, min. RMS, both channels
driven, into 3 ohms at 70 Hz with no more than
0.9% total harmonic distortion.
driven, into 3 ohms at 70 Hz with no more than
0.9% total harmonic distortion.
Input Sensitivity/Impedance (70 Hz)
SUB-WOOFER IN
670 mV/47 kohms
Speaker terminals
Impedance
3 – 16 ohms
General
Dimensions
200 x 80 x 323.4 mm (W/H/D)
(7-7/8
(7-7/8
×
3-3/16
×
12-3/4 inches)
Mass
3.2 kg (7.1 lbs)
Power Specifications
Power Requirements
AC 120 V
, 60 Hz
Power Consumption
54 watts (at operation)
8.6 watts (in standby mode)
8.6 watts (in standby mode)
Specifications
EN41-52.CA-EX90[J]/1
98.6.8, 8:28 AM
50