JVC CA-UXQ3S 用户手册
21
Recording Sound
Recording Sound to Cassette Tapes
Main unit
Remote control
NOTE
• The sound input level during recording is
automatically adjusted.
• When you record tracks from a CD or MP3, a 4-
second blank is inserted between tracks in the
recording. You can record tracks with no blank
time. (
time. (
page 22)
CAUTION
• It may be unlawful to record or playback
copyright material without the consent of the
copyright owner.
• Do not use long cassette tapes such as C-120 or
C-150. Long cassette tapes are thin and stretch
easily, and may become tangled in the inner part
of the main unit.
easily, and may become tangled in the inner part
of the main unit.
• Since this product is not compatible with TYPE II
and TYPE IV cassette tapes, do not use these
types of cassette tapes. This product does not
meet the specifications for these tapes, so sound
is not properly recorded to these types of cas-
sette tapes. You cannot obtain proper playback
sound.
• Write protect tags are attached to a cassette
tape for preventing the erasing of recorded
sound. They enable you to avoid losing impor-
tant recordings because once you snap off the
write protect tags, you cannot record to the cas-
sette tape or erase recorded material.
• When you want to use the cassette tape for
recording again, cover the tag holes with adhe-
sive tape.
1
Insert a cassette tape for
recording.
• Before inserting the cassette tape, wind the
tape past the leader part of the cassette
tape.
tape.
2
Press
to select the reverse
mode.
• Each time you press
, the display tog-
gles as follows.
3
Select a sound source for recording.
4
Press
on the main unit.
Preventing recorded sound from
being erased
Sound source
Operation
CD or MP3
Press
, and then press
.
(The CD is stopped.)
Radio broad-
cast
cast
Select the radio station whose broad-
cast you want to record (
cast you want to record (
page 14).
Sound from
other equip-
ment (AUX)
other equip-
ment (AUX)
Press
and prepare playback on
the other equipment (
page 20).
Write protect
tag for side A
tag for side A
Write protect
tag for side B
tag for side B
Magnetic tape
(recordable part)
(recordable part)
Leader tape (unrecordable part)
: For one-way recording on either side.
: For one return recording on both sides.
: Pressing
automatically starts
one return recording on both sides.
UX-Q3[A]-09.fm 21 ページ 2004年9月21日 火曜日 午後4時42分