Sharp XL-HF202PH(S) 数据表

XL-HF202PH(S) Hi Fi Component System consisting of XL-HF202PH(S) (main unit) and CP-HF202H (speaker system).
XL-HF202PH(BK) Hi Fi Component System consisting of XL-HF202PH(BK) (main unit) and CP-HF202H (speaker system).
XL-HF302PH(T) Hi Fi Component System consisting of XL-HF302PH(T) (main unit) and CP-HF302H (speaker system).

The following accessories are included.

The illustration printed in this operation manual are for model XL-HF202PH(S).

●

●

●

Hereby, SHARP Electronics declares that this SHARP Hi Fi 

Component System XL-HF202PH(S)/XL-HF202PH(BK)/XL-

HF302PH(T) is in compliance with the essential requirements 

and other relevant provisions of Directive 1999/5/EC. The 

declaration of conformity may be consulted at:

http://www.sharp.de/doc/XL-HF202PH_XL-HF302PH.pdf

●

When the ON/STAND-BY button is set at STAND-BY 
position, mains voltage is still present inside the unit. 
When the ON/STAND-BY button is set at STAND-BY 
position, the unit may be brought into operation by the 
timer mode or remote control.
This unit contains no user serviceable parts. Never 
remove covers unless qualifi ed to do so. This unit 
contains dangerous voltages, always remove mains 
plug from the socket before any service operation and 
when not in use for a long period.

●

●

To prevent fi re or shock hazard, do not expose this 
appliance to dripping or splashing. No objects fi lled 
with liquids, such as vases, shall be placed on the 
apparatus.
Do not turn the volume on to full at switch on. Listen to 
music at moderate levels. Excessive sound pressure 
from earphones and headphones can cause hearing 
loss.

This product is classifi ed as a CLASS 1 LASER 
PRODUCT.
This product contains a low power laser device. To 
ensure continued safety do not remove any cover or 
attempt to gain access to the inside of the product. 
Refer all servicing to qualifi ed personnel.

●

●

●

●

■

 

 

■

 

Keep your equipment at least 10 cm (4”) of free space 

along the sides, top and back for proper ventilation.

10 cm (4”)

10 cm (4”)

10 cm (4”)

10 cm (4”)

Use the unit on a ¿ rm, level surface free from vibration.

Place the speakers at least 30 cm (12”) away from any 

CRT TV to avoid colour variations across the TV screen. 

If the variations persist, move the speakers further away 

from the TV. LCD TV is not prone to such variation.

Keep the unit away from direct sunlight, strong mag-

netic  ¿ elds, excessive dust, humidity and electronic / 

electrical equipment (home computers, facsimiles, etc.) 

which generate electrical noise.

Do not expose the unit to moisture, to temperatures 

higher than  60°C (140°F) or to extremely low tempera-

tures.

If the unit does not work properly, unplug and plug it in 

again. Then turn on the unit.

In case of an electrical storm, unplug the unit for safety.

Hold the AC power plug by the head when removing it 

from the wall socket, as pulling the lead can damage 

internal wires.

●

●

●

●

●

●

●

●

Do not place anything on top of the unit.

The AC power plug is used as a disconnect device and 

shall always remain readily operable.

The ventilation should not be impeded by covering the 

ventilation openings with items, such as newspapers, 

tablecloths, curtains, etc.

No naked À ame sources, such as lighted candles, 

should be placed on the apparatus.

Attention should be drawn to the environmental as-

pects of battery disposal.

This unit should only be used within the range of 5°C 

- 35°C (41°F - 95°F).

The apparatus is designed for use in moderate cli-

mates.

Warning:
The voltage used must be the same as that speci¿ ed on this 

unit. Using a higher voltage is dangerous and may result in 

a ¿ re or other type of accident causing damage.

SHARP will not be held responsible for any damage result-

ing from such usage.

■

The sound level at a given volume setting depends on 

speaker ef¿ ciency, location and various other factors. It is 

advisable to avoid exposure to high volume levels, which 

occurs while turning the unit on with the volume control 

setting up high, or while continually listening at high vol-

umes. Excessive sound pressure from earphones and 

headphones can cause hearing loss.

●

●

●

●

●

●

●

●

■

 

■

19

20

7
8

10

13

12

11

15

16

14

5

2

4

6

3

1

21

22

23

24

25

26

18

17

9

27

29

37

38
39

36

35

33

32

31

30

34

28

■

■

Make sure nothing comes into contact 

with the speaker diaphragms when you 

remove the speaker grilles.

■

Connect to the FM 75 OHMS socket and position it where 

reception is best.
External FM aerial:

Use an external FM aerial (75 ohms coaxial cable) for 

better reception. Disconnect the supplied FM aerial wire 

before use.
Note:
Keep the aerial away from the unit or AC power lead to 

avoid noise pickup.

■

red wire

wire with red insulation tube

black wire

wire with black insulation tube

Use speakers with an impedance of 4 ohms or more, 

as lower impedance speakers can damage the unit.

Do not mistake the right and the left channels. The 

right speaker is the one on the right side when you 

face the unit.

●

●

Do not let the bare speaker 

wires touch each other.

Do not allow any objects to fall 

into or to be placed in the bass 

reÀ ex ducts.

Do not stand or sit on the 

speakers. You may be injured.

●

●

●

■

The  ¿ rst time the unit is plugged in, it will enter the 

Bluetooth stand-by (demonstration) mode. “Bluetooth 

Stby” will be displayed.

To cancel the Bluetooth stand-by (demonstration) 

mode, press the DEMO button (remote control) dur-

ing power stand-by mode. The unit will enter the low 

power consumption mode.

To return to the Bluetooth stand-by (demonstration) 

mode, press the DEMO button again.

During Bluetooth stand-by condition, NFC function is ac-

tivated once your device touch the supplied NFC tag.

If iPod or iPhone is docked, the unit will begin charg-

ing.

“Charge Mode” will be displayed. Demonstration mode 

is invalid during charge mode.

■

After all connections have been made correctly, plug the 
AC power lead into the wall socket.
Note:
Unplug the AC power lead from the wall socket if the unit 
will not be in use for a prolonged period of time.

●

●

●

●

●

Press FUNCTION button (main unit) or AUDIO/LINE (IN-

PUT) button (remote control) repeatedly until Line in is 

displayed.

No sound is heard from the subwoofer without a built-

in ampli¿ er.

Subwoofer Pre-out (audio signal): 200mV / 10k ohms 

at 70 Hz.

●

●

Wall socket

(AC 220 

- 240 V ~ 

50/60 Hz)

To TV audio 

output socket.

FM 

aerial

Left 

speaker

Right 

speaker

TV

Red

To LINE 

input 

socket

To audio input 
socket

Audio cable

(not supplied)

Commercially 

available 

Subwoofer 

(Ampli¿ er 

Built-In)

■

Open the battery cover.
Insert the supplied battery according to the terminal 

indicated in the battery compartment. When inserting 

or removing the battery, push it towards the (–) battery 

terminals.
Close the cover.

Remove the battery if the unit will not be used for a 

long period of time. This will prevent potential damage 

due to battery leakage.

Do not use rechargeable battery (nickel-cadmium bat-

tery, etc.).

Installing the battery incorrectly may cause the unit to 

malfunction.

Batteries (battery pack or batteries installed) shall not 

be exposed to excessive heat such as sunshine, ¿ re 

or the like.

●

●

●

●

Replace the battery if the operating distance is reduced 

or if the operation becomes erratic. Purchase an “AA” 

size battery (UM/SUM-3, R6, HP-7 or similar).

Periodically clean the transmitter on the remote control 

and the sensor on the unit with a soft cloth.

Exposing the sensor on the unit to strong light may 

interfere with operation. Change the lighting or the di-

rection of the unit if this occurs.

Keep the remote control away from moisture, heat, 

shock and vibrations.

■

The remote control can be used within the range shown below:

Remote sensor

0.2 m - 6 m

(8” - 20’ )

●

●

●

●

■

Press the ON/STAND-BY button to turn the power on or off.

■

Press the DEMO/DIMMER button (remote control).

Dimmer 1

Dimmer 2

Dimmer off

(Display is dim).

(Display is bright).

(Display gets dimmer).

■

If you turn off and on the main unit with the volume set to 

27 or higher, the volume starts at 16 and fades in to the 

last set level.

■

Turn the volume knob towards VOLUME +/– (main unit) 

or press VOL +/– (remote control) to increase or decrease 

the volume.

■

To mute the volume, press the   button (remote control).

Press again to restore the volume.

■

When you press any of the following buttons, the unit turns 

on.

CD, USB, iPod, BLUETOOTH, AUDIO/LINE (INPUT), 
TUNER, iPod 

/ , CD/USB  / , BLUETOOTH  /  on the 

remote control: Selected function is activated.

/   button on the main unit: The unit turns on and 

playback of the last function will start (CD, USB, iPod, 
BLUETOOTH, AUDIO IN, LINE IN, TUNER)

●

●

■

The main unit will enter the stand-by mode (when iPad, 

iPod or iPhone is not connected) after 15 minutes of inactiv-

ity during:
iPod: Not docked.

Audio/Line In: No detection of input signal.

CD: In the stop mode or no disc.

USB: In the stop mode or no media.

Bluetooth: In the pause mode on not connected condition.
Note:
However, if iPod or iPhone is docked, the unit will begin 

charging. “Charge Mode” will be displayed.

■

When the power is ¿ rst turned on, the unit is in the extra 

bass mode. “X-BASS” indicator appears. To cancel this 

mode, press the X-BASS button (remote control).

■

Press the BASS/TREBLE button to select “Bass” or “Treble”.
Within 5 seconds, press the VOLUME (+ or –) button to ad-

just the bass or treble.

- 5 ↔ - 4........↔ + 4 ↔ + 5

 

- 5 ↔ - 4........↔ + 4 ↔ + 5

■

Press the FUNCTION button repeatedly to select desired 

function.

CD

FM MONO

FM STEREO

USB

Line In

Audio In

iPod

Note:
The backup function will protect the memorised function 

mode for a few hours should there be a power failure or 

the AC power lead becomes disconnected.

A Bluetooth audio 
source device 
(smartphone / 
tablet).

■

Near Field Communication (NFC) is a set of standards for 
devices (smartphones/tablets) to establish radio communi-
cation with each other by touching/tapping them together 
or bringing them into close proximity.
Using NFC in this product simplifi es the pairing method of 

Bluetooth connectivity.

This audio system supports NFC-enabled device with 
Android 4.1, Jelly Bean and higher.
For device with a lower Android version, refer the 
operation manual of the device for recommended app 
(application).

●

●

Unlike other wireless technology, NFC requires no 
discovery or pairing.
Simply tap the source device to the NFC tag to instantly 
enjoy seamless connectivity between your smart device 
and the audio system.

■

NFC detection area location may vary depending on the 
device (smartphone / tablet). Refer operation manual of 
the device for detail.

NFC tag

(during Bluetooth stand-by mode)

Manual Blu

etooth setting

Switch ‘ON’

 

Search / 

scan

Pairing

Connect

The NFC tags can be placed anywhere convenient to you. 
The velcro tapes supplied will help to secure the tags onto 
the desired location.

Make sure that the NFC tag is placed on a fl at and level 
surface.
If you choose not to use the velcro tape, do not place 
the NFC tag near metal surface to avoid connection 
interference during tagging.

Important:

NFC tag has unique ID for each individual set, SHARP 
provides 2 identical tags for your convenience.
SHARP will not be held liable for the damages caused 
by rewriting the tags.

Keep all small parts away from children as they may 
be accidentally swallowed.

●

●

●

●

Peel the separator off the velcro tape (loop type) and 

stick it on a desired surface.

Separator

Velcro 

tape (loop 

type)

Peel the separator off the velcro tape (hook type) and 

stick it to the rear of the NFC tag. Then place the tag 

onto the desired location.

Separator

Rear view of the 
NFC tag

Velcro tape 
(hook type)

■

■

Bluetooth wireless technology is a short-range radio 
technology that enables wireless communication between 
various types of digital devices, such as mobile phone or 
computer. It operates within a range of about 10 meters (30 
feet) without the hassle of having to use cables to connect 
these devices.

This unit supports the following:
Communication System: Bluetooth Specifi cation version 
2.1 Bluetooth + Enhanced Data Rate (EDR).
Support Profi le : A2DP (Advanced Audio Distribution Profi le) 
and AVRCP (Audio/Video Remote Control Profi le)
Notes when using unit with a mobile phone

This unit cannot be used to talk over the telephone even 

when there is a Bluetooth connection made to a mobile 

phone.

Please refer to the operating manual supplied with the 

mobile phone for details on operation of your mobile 

phone while transmitting the sound using a Bluetooth 
connection.

●

●

■

Bluetooth devices need to be initially paired ¿ rst before they 
can exchange data. Once paired, it is not necessary to pair 
them again unless:

pairing is made with more than 8 devices. Pairing can 
only be made one device at a time. This unit can be 
paired to a maximum of 8 devices. If subsequent device 
is paired, the oldest device paired, will be deleted and 
replaced with the new one.
this unit is reset. All pairing information is deleted when 
unit is reset.
pairing information is deleted while re-pairing, etc.

●

●

●

■

Your device (smartphone / tablet) has an NFC function.
NFC function on your device is turned on.
Screen lock function of the device is off.
This unit is not in Eco mode.

Touch your device to the supplied NFC tag.

NFC tag

A pop-up window asking whether to proceed with the 

Bluetooth  connection appears on the device. Select 

<YES>.
The ‘connected’ message appears when the connec-
tion is complete.
Playback will start automatically. Otherwise, press play 

(on remote control or source device).
Sound will be heard from the speakers of this unit via 
audio streaming.
Your device and NFC tag must be within 10 meters 
from the unit

.

●

●

●

●

●

●

●

Press the button to play or pause.

Press the button to skip up.
Press and hold to fast forward.

Press the button to skip down.
Press and hold to fast reverse.

To listen to audio via Bluetooth connectivity without NFC 

tag - refer “Pairing with other Bluetooth source devi-
ces” on page 8.

To disconnect, simply touch your device to the tag again.

●

●

Indicators:

Blinks

In waiting or pairing mode

Lights up

Connected

No indication

Unconnected

However, the indication status is not displayed during 
Bluetooth stand-by mode.

■

Press the ON/STAND-BY button to turn the power on.

Press the FUNCTION button (main unit) repeatedly or 

BLUETOOTH button (remote control) to select Blue-

tooth function. “Bluetooth” appears on the display.

Press and hold the PAIRING button for 3 seconds or 

more. “Start Pairing” appears on the display. The unit 

is now in pairing mode and is ready to be paired with 

other Bluetooth source device.

Perform pairing procedure on the source device to 

detect this unit. “SHARP XL-HF202” will appear in 

the detected devices list (if available) in the source 

device. (Refer the source device operating manual for 

details).
Notes:

Place the devices to be paired within 1 meter (3 
feet) of each other when pairing.
Some source devices are unable to display lists of 
detected devices. To pair this unit with the source 
device, refer to the source device operating man-
ual for details.

●

●

Select “SHARP XL-HF202” from the source list. If 

Passcode* is required, enter “0000”.

Passcode may be called PIN Code, Passkey, PIN 
number or Password.

*

“Pair Complete” and then “Connected” appears on the 

display once the unit is successfully paired with the 

source device. (Pairing information is now memorised 

in the unit.) Some audio source devices may connect 

with the unit automatically after pairing is completed, 

otherwise follow the instructions in the source device 

operating manual to start connection.

Press the play button on main unit, remote control or 

source device to start Bluetooth connection.

If a device such as microwave oven, wireless LAN card, 
Bluetooth device or any other device that uses the 
same 2.4 GHz frequency near the system some sound 
interruption may be heard.
The transmission distance of the wireless signal be-
tween the device and the main unit is about 10 m (32 ‘), 
but may vary depending on your operating environment. 
If a steel concrete or metallic wall is between the device 
and the main unit, the system may not operate at all, 
because the wireless signal cannot penetrate metal.

●

●

If this unit or the source device is turned off before Blue-
tooth connection is completed, pairing will not be com-
pleted and the pairing information will not be memo-
rised. Repeat step 1 onwards to start pairing again.
To pair with other devices, repeat steps 1 - 5 for each 
device. This unit can be paired to a maximum of 8 de-
vices. If subsequent device is paired, the oldest device 
paired, will be deleted and replaced with the new one.
Once a device is ousted or deleted from the pairing list, 
the pairing information for the device is also deleted. To 
listen to the sound from the device again, it needs to be 
re-paired. Perform steps 1 - 5 to pair the device again.

■

The source device Bluetooth functionality is ON.
Pairing of this unit and the source device is completed.
Unit is in connected mode. 

Press the ON/STAND-BY button to turn the power on.

Press the FUNCTION button to select Bluetooth func-

tion.

Start the Bluetooth connection from the Bluetooth 

stereo audio source device.

Press the BLUETOOTH  /  button.
Notes:

For various Bluetooth operations, refer “NFC con-
nection for audio playback” on page 7.
If the source device has an extra bass function or 
equalizer function, set them to off to avoid sound 
distortion.

●

●

Make the Bluetooth connection again if the source device 
is not turned on, or its Bluetooth functionality is off or is in 
sleep mode.

■

Perform any of the followings.
– Disconnect the Bluetooth connection on the audio source 

device. Refer the operating manual supplied with the 
device.

– Turn off the Bluetooth stereo audio source device.
– Turn off this unit.
Note:
The volume of this unit may not be controlled as intended 
depending on the device.

■

During Bluetooth Stand-by mode, when music is played from 
your device, the unit will automatically power on when the 
Bluetooth connection has been set up between the main unit 
and your device and they remain connected.
Note:
This function is not applicable during Demonstration mode 
off.

●

●

●

●
●
●

●

■

Open Accessory support allows external USB hardware 
(an Android USB accessory) to interact with an Android-
powered device in a special accessory mode. When an 
Android-powered device is in accessory mode, the con-
nected accessory acts as the USB host (powers the bus 
and enumerates devices) and the Android-powered device 
acts in the USB accessory role. Android USB accessories 
are speci¿ cally designed to attach to Android-powered 
devices and adhere to the Open Accessory Protocol, that 
allows them to detect Android-powered devices that support 
accessory mode.

Insert the connector to the device.

Connector

Device

(Smartphone/Tablet)

Connect the device to the main unit via USB connector.

USB connector 
(not supplied)

■

Press the ON/STAND-BY button to turn the power on.
Press the USB button (remote control) or FUNCTION 

button repeatedly (main unit) to select USB function.
Connect the device (Smartphone/Tablet) to the unit.
“USB Media” will be displayed.

Press the play button (on main unit, remote control or 

device).

If the source device has an extra bass or equalizer 
function, set them to off. If these functions are on, 
sound may be distorted.
Incoming calls will pause the playback/application.
Once the calls are answered, the conversation can only 
be heard through the built-in speaker of the cellular 
device. Turn on the device speaker or disconnect the 
device to start conversation.

■

Quit the application (apps).
Disconnect the device from the USB terminal.

■

Press in the playback or 

stop mode.

If you press the button 

in the stop mode, press 

the  /  button to start the 

desired track.

Press and hold down in 

the playback mode.

Release the button to 

resume playback.

If non-compatible device is detected, “Dev No Support” 
will be displayed.
Controls (play/pause/skip up/skip down) will function 
based on actual Applications (Apps) controls used on 
Android devices.

Android is a trademark of Google Inc.

●

●

●

●

●

iPhone 5

iPhone 4S

iPhone 4

iPhone 3GS

iPhone 3G

iPhone

iPad (4th generation)

iPad mini

iPad (3rd generation)

iPad 2

iPad

●

●

●

●

●

●

●

●

●

●

●

iPod touch (5th generation)

iPod touch (4th generation)

iPod touch (3rd generation)

iPod touch (2nd generation)

iPod touch (1st generation)

iPod classic

iPod nano (7th generation)

iPod nano (6th generation)

iPod nano (5th generation)

iPod nano (4th generation)

iPod nano (3rd generation)

iPod nano (2nd generation)

●

●

●

●

●

●

●

●

●

●

●

●

Caution:
Update your iPod, iPhone and iPad unit to the latest soft-

ware version before using them. Visit Apple’s homepage to 

download the latest version.
Notes:

Charging terminal for iPod, iPhone and iPad:

USB function

NO

YES

Other function 

(Bluetooth/CD/Tuner/

USB/iPod/Audio/Line in)

YES

NO

Bluetooth Stand-by

YES

NO

The message “This accessory is not made to work with 

iPhone” or similar, may appear on the iPhone screen when:

- battery is low.

- the iPhone is not properly docked (eg. slanting).

If this occurs, remove and re-dock the iPhone.

The headphone output is switched off during inserting iPod, 

iPhone and iPad unit. This is an Apple product speci¿ cation.

■

Insert the connector to the iPod, iPhone or iPad.

Connector

iPad

Place the iPad to the stand for iPad.

iPad

Stand for iPad

Connect the iPod, iPhone or iPad to the unit via USB 

connector.

USB

Note:
USB terminal does not support VIDEO out.

●

●

●

■

Press the ON/STAND-BY button to turn the power on.
Press the USB button (remote control) or FUNCTION 

button repeatedly (main unit) to select USB function.
Connect iPod, iPhone or iPad to the unit. “USB/iPod” 

will appear.

Track number

Press the  /  (CD/USB  / ) button to start playback.

Note:
Stop button ( ) is invalid during iPod, iPhone or iPad play-

back.
Note for iPhone playback:

Sound will only switch from iPhone to the main unit 

after authentication process is completed in approxi-

mately 10 seconds. 

Incoming calls will pause the playback.

Once the calls are answered, the conversation can 

only be heard through the built-in iPhone speaker. 

Turn on the iPhone speaker or undock the iPhone to 

start conversation.

■

Caution:
Unplug all accessories from the iPod or iPhone before 
inserting it into the dock.
Note:
Docking station is for iPod touch (5th generation), iPod 
nano (7th generation) and iPhone 5 connection only. Other 
Apple products (iPod, iPhone and iPad) can be connected 
via USB terminal.

Open the docking station for iPod and iPhone by 

pulling up the cover.

●

●

●

Dock your iPod or iPhone into the unit.

iPhone (bottom)

Lightning connector

Dock for iPhone

 iPhone

Lightning 

connector

■

Press the ON/STAND-BY button to turn the power on.
Press the iPod button on the remote control or FUNCTION 

button repeatedly on the main unit to select iPod function.
Insert iPod or iPhone unit into the dock of main unit. 

“Dock Ok” will appear.
Press the  /  (iPod  / ) button to start playback.

■

Simply remove the iPod or iPhone from the docking station 

or iPad connector from USB terminal. It is safe to do so 

even during playback.

■

Press the MENU button to view the menu on iPod, iPhone 

or iPad unit. Press it again to go back to previous menu.
Use the PRESET (  or  ) button to select an item on 

the menu and then press ENTER button.

Note:
When navigating the iPod, iPhone or iPad menu with re-

mote control, do not operate any of the buttons on the iPod 

or iPhone unit. The volume level is adjusted by pressing 

the VOL (+ or –) button on the main unit or the remote 

control. Adjusting the volume on the iPod, iPhone or iPad 

units give no effect.

iPod, iPhone and iPad operations:
The operations described below depend on the generation 

iPod, iPhone and iPad you are using.

System on operation:
When the main unit is powered on, the iPod, iPhone or 

iPad units will automatically power on when docked or 

connected to the unit.

System off (stand-by operation):
When the main unit is turned to stand-by mode, the docked 

iPod, iPhone or connected iPad unit will automatically turn 

to stand-by mode.

■

Press in the pause 

mode.

Press in the 

playback mode.

Press in the 

playback or pause 

mode. If you press 

the button in the 

pause mode, press 

the  /  button to 

start the desired 

track.

Press and hold 

down in the 

playback mode.

Release the 

button to resume 

playback.

____

Press to display 

iPod information.

____

Press to toggle 

repeat mode.

____

Press to toggle 

shufÀ e mode.

____

Press to view the 

iPod menu during 

iPod function.

____

Press to con¿ rm the 

selection.

____

Press to select the 

iPod menu.

■

Press the ON/STAND-BY button to turn the power on.
Press the CD button on the remote control or FUNCTION 

button repeatedly on the main unit to select CD function.
Press the OPEN/CLOSE button to open the disc compart-

ment.
Place the disc in the disc compartment, label side front.
Press the OPEN/CLOSE button to close the disc tray.
Press the  /  (CD/USB  / ) button to start playback.

Press the   (CD/USB  ) button.

Do not place two discs in one-disc-tray.

Do not play discs of special shapes (heart, octagon, 

etc). It may cause malfunctions.

Do not push the disc tray while it is moving.

If the power fails wait until the power is restored.

If TV or radio interference occurs during CD operation, 

move the unit away from the TV or radio.

Be sure to place 8 cm (3”) disc in the middle of the 

disc tray.

Due to the structure of the disc information, it takes 

longer to read an MP3/WMA disc than a normal CD 

(approximately 20 to 90 seconds).

Rewritable multi-session discs with un¿ nished writing, 
can still be played.

●

●

●

●

●

●

●

●

●

■

Press in the stop mode.

Press in the playback 

mode. Press the 

/  button to resume 

playback from the 

paused point.

Press in the playback 

mode.

Press in the playback or 

stop mode.

If you press the button 

in the stop mode, press 

the  /  button to start 

the desired track.

Press and hold down in 

the playback mode.

Release the button to 

resume playback.

■

The Numeric buttons allow you to select up to number 9.

When selecting number 10 or higher, use the “10+” button.

Press the “10+” button once.
Press the “1” button.
Press the “3” button.

Selected track number

Press the “10+” button twice.
Press the “1” button.
Press the “3” button.
Press the “0” button.

A track number higher than the number of tracks on 

the disc cannot be selected.

During random play, direct search is not possible.

■

To random play all tracks:
Press RANDOM button on the remote control until “Random” 
appears. Press the  /  (CD/USB  / ) button.
To cancel random play:
Press the RANDOM button again. “RDM” indicator will dis-
appear.

If you press the 

 button during random play, you 

can move to the track selected next by the random 

operation. However, the 

 button does not allow you 

to move to the previous track. The beginning of the 

track being played will be located.

In random play, the unit will select and play tracks auto-

matically. (You cannot select the order of the tracks.)

●

●

●

●

●

●

■

Repeat play can play one track, all tracks or a programmed se-

quence continuously.

Select desired track using the Numeric buttons.

Press the REPEAT button repeatedly until “Repeat One” appears. 

Press the  /  (CD/USB  / ) button.

Press the REPEAT button repeatedly until “Repeat All” appears. 

Press the  /  (CD/USB  / ) button.

Perform steps 1 - 5 in “Programmed play” section on this page 

and then press the REPEAT button repeatedly until “Repeat All” 

appears.

To repeat one folder:
While in Folder mode on (MP3/WMA), press REPEAT button 
repeatedly until “Repeat Folder” appears. Press the  /  (CD/

USB  / ) button.

Press the REPEAT button repeatedly until “Normal” appears and 

“ ” disappears.

Caution:
After performing repeat play, be sure to press the   (CD/

USB  ) button. Otherwise, the disc will play continuously.

■

While in the stop mode, press the MEMORY button on the 

remote control to enter the programming save mode.
Press the 

 or 

 button to select the desired track.

Selected track number

Press the MEMORY button to save the track number.
Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be 

programmed. If you want to check the programmed tracks, 

press the MEMORY button repeatedly. To clear the pro-

grammed tracks, press the CLEAR button.
Press the  /  (CD/USB  / ) button to start playback.

■

While in the stop mode, press the MEMORY button to 

enter the programming save mode.
Press the PRESET (  or  ) button on the remote con-

trol to select the desired folder.

Then press the 

 or 

 button (remote control) to se-

lect the desired tracks.

Press the MEMORY button to save the folder and track 

number.
Repeat steps 2 – 3 for other folder/tracks. Up to 32 

tracks can be programmed.
Press the  /  (CD/USB  / ) button to start playback.

To cancel the programmed play mode:
During programmed stop mode, press the   (CD  ) but-
ton. The display will show “Memory Clear” and all the pro-
grammed contents will be cleared.
Adding tracks to the programme:
If a programme has been previously stored, the “MEM” 
indicator will be displayed. Press the MEMORY button. 
Then follow steps 2 - 3 to add tracks.
Notes:

When the disc compartment is opened, the programme 
is automatically cancelled.
If you press the ON/STAND-BY button to enter the 
stand-by mode or change the function from CD to an-
other, the programmed selections will be cleared.
During the programme operation, random play is not 
possible.

■

To play back CD-R/RW.

Press the CD button on the remote control, and load 

an MP3/WMA disc. Press the FOLDER button and 

disc info will be displayed.

MP3 indicator

Total number of ¿ les

TOTAL indicator

WMA indicator

Total number of folder

Press the PRESET (  or  ) button to select desired 

playback folder. (Folder mode on)

FOLDER 

indicator

FOLDER number First track number in 

the folder

Select desired ¿ le to be played back by pressing the 

 or 

 button.

Press the  /  (CD/USB  / ) button. Playback will start 

and ¿ le name will be displayed.

Title, Artist and Album name are displayed if they 
are recorded on the disc.
In case of playback with the folder mode on, press 
the PRESET (  or  ) button, and the folder can 
be selected even though it is in playback/pause 
mode. It will continue playback/pause mode in the 
1st track of the selected folder.
Display content can be changed by pressing the 
CD/USB DISPLAY button.

Title display

Counter display

Album display

Folder display

File name display

Artist display

Note:
If “Not Support” is displayed, it means “Copyright protected 
WMA ¿ le” or “Not supported playback ¿ le” is selected.

●

●

●

●

●

●

Note: 
This product is not compatible with MTP and AAC ¿ le sys-
tems from USB mass storage device or MP3 player.

■

Press the USB button (remote control) or FUNCTION 

button (main unit) repeatedly to select USB function. 

Connect the USB memory device that has MP3/WMA 

format ¿ les on the unit. When the USB memory is con-

nected to the main unit, the device information will be 

displayed.
To playback with folder mode on, follow step 2 below.
To playback with folder mode off, skip to step 3 below.
Press the FOLDER button, and press the PRESET (  or 

) button to select desired playback folder. To start play-

back, go to step 4. To change the playback folder, press 

the PRESET (  or  ) button to select another folder.
Select desired ¿ le to be played back by pressing the 

 or 

 button.

Press the  /  (CD/USB  / ) button. Playback will start 

and the ¿ le name will be displayed.

Title, Artist and Album name are displayed if they 
are recorded in the USB memory device.
Display content can be changed by pressing the 
CD/USB DISPLAY button.

Note:
To pause playback:
Press the  /  (CD/USB  / ) button.

■

Press the   (CD/USB  ) button to stop playback.
Disconnect USB memory device from the USB terminal.

●

●

SHARP will not be held liable for the loss of data while the 
USB memory device is connected to the audio system.
Files compressed in MP3 and/or WMA format can be 
played back when connected to the USB terminal.
This USB memory’s format supports FAT 16 or FAT 32.
SHARP cannot guarantee that all USB memory de-
vices will work on this audio system.
USB cable is not recommended for use in this audio 
system to connect to USB memory device. Use of 
the USB cable will affect the performance of this au-
dio system. iPod, iPhone and iPad is not prone to this 
condition.
This USB memory cannot be operated via USB hub.
The USB terminal in this unit is not intended for a PC 
connection.
External HDD-storage cannot be played back via USB 
terminal.
If the data inside the USB memory is large, it may take 
longer time for the data to be read.
This product can play WMA and MP3 ¿ les. It will au-
tomatically detect the ¿ le type being played. If unplay-
able ¿ le is played on this product, “Not Support” is in-
dicated and the ¿ le will be automatically skipped. This 
will take a few seconds. If abnormal indications appear 
on the display due to the unspeci¿ ed ¿ le, turn off the 
unit and then turn it on again.
This product relates to USB mass storage devices 
and MP3 players. It may however face some irregu-
larities due to various unforeseen reasons from some 
devices. Should this happen, turn off the unit and then 
turn it on again.
During CD function, MP3 player will not be charging.

Note:
If USB memory device is not connected, “USB No Media” 
will be shown on the display.

This unit only supports “MPEG-1 Audio Layer-3” for-

mat. (Sampling Frequency is 32, 44.1, 48kHz)

Playback order for MP3 ¿ les may differ depending on 

the writing software used during ¿ le download.

Bitrate which is supported by MP3 is 32~320 kbps, 

WMA is 64~160 kbps.

Files without MP3/WMA format cannot be played back.

Playlists are not supported on this unit.

This unit can display Folder Name or File Name up to 

32 characters.

Total number of folders read is 999 including folder 

with non-playable ¿ le. However, the display shows 

only folder with MP3/WMA ¿ les.

The display playback time may not be displayed cor-

rectly when playing back a variable bitrate ¿ le.

WMA meta tag also supports title, artist and album 

name which are recorded in WMA ¿ les. Copyright pro-

tected WMA ¿ les cannot be played back.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

■

Press the ON/STAND-BY button to turn the power on.
Press the TUNER button (remote control) or 

FUNCTION button (main unit) repeatedly to select FM 

Stereo or FM Mono.
● Manual tuning:
Press the TUNING (  or  ) button repeatedly to tune 

in to the desired station.

● Auto tuning:

Press and hold the TUNING (  or  ) button. Scanning will 

start automatically and the tuner will stop at the ¿ rst receiv-

able broadcast station.

When radio interference occurs, auto scan tuning may 

stop automatically at that point.

Auto scan tuning will skip weak signal stations.

To stop the auto tuning, press the TUNING (  or  ) 

button again.

When an RDS (Radio Data System) station is tuned in, 

the frequency will be displayed ¿ rst, and then the RDS in-

dicator will light up. Finally, the station name will appear.

Full auto tuning can be achieved for RDS stations 

“ASPM”, see page 16.

Press the TUNER button to select stereo mode. “ST” 

indicator will be displayed. “

” and “ ” will appear 

when an FM broadcast is in stereo.

If the FM reception is weak, press the TUNER button 

to extinguish the “ST” indicator. The reception changes 

to monaural, and the sound becomes clearer.

■

You can store 40 FM stations in memory and recall them 
at the push of a button. (Preset tuning)

Perform steps 2 - 3 in “Tuning”.
Press the MEMORY button.

Within 30 seconds, press the PRESET (  or  ) button 

to select the preset channel number. Store the stations 

in memory, in order, starting with preset channel 1.

●

●

●

●

●

●

●

Within 30 seconds, press the MEMORY button to store 

that station in memory. If the “MEM” and preset number 

indicators disappear before the station is memorised, 

repeat the operation from step 2.
Repeat steps 1 - 4 to set other stations, or to change 

a preset station. When a new station is stored in the 

memory, the station previously memorised for that 

preset channel number will be erased.

Note:
The backup function protects the memorised stations for a 
few hours should there be a power failure or the AC power 
lead become disconnected.

■

Press and hold the PRESET (  or  ) button to select the 
desired station.

■

Press and hold the PRESET (  or  ). button until the 

preset number À ashes. The programmed stations will 

be tuned in sequentially, for 5 seconds each.
Press the PRESET (  or  ) bbutton again when the 

desired station is located.

■

Press the ON/STAND-BY button to turn the power on.
Press the FUNCTION button (main unit) repeatedly  
or TUNER button (remote control) to select Tuner 
function.
In Tuner function, press and hold the CLEAR button 
(remote control) until “Tuner Clear” appears.

RDS is a broadcasting service which a growing 
number of FM stations provide. These FM stations 
send additional signals along with their regular pro-
gramme signals. They send their station names, and 
information about the type of programme such as 
sport, music, etc.
When tuned to an RDS station, “RDS” and the station 
name will be displayed.
“TP” (Traf¿ c Programme) will appear on the display when 
the received broadcast carries traf¿ c information, and “TA” 
(Traf¿ c Announcement) will appear whilst a traf¿ c informa-
tion is on air.“
“PTYI” (Dynamic PTY Indicator) will appear whilst the Dy-
namic PTY station is received.

iPad, iPhone, iPod, iPod classic, iPod 
nano,and iPod touch are trademarks of 
Apple Inc.,registered in the U.S. and other 
countries. Lightning is a trademark of 
Apple Inc..

This audio system supports NFC-enabled device with Android 4.1, Jelly Bean and higher.
For device with a lower Android version, refer the operation manual of the device for recommended 
app (application).

●
●

Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this 
manual carefully. It will guide you in operating your SHARP product.

Supply of this product does not convey a license nor imply any right to distribute content created with this product in 
revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue-generating 
streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution 
systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact 
discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for 
such use is required. For details, please visit http://mp3licensing.com
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.

13H R MW 

1

TINSEA451AWZZ

*TINSEA451AWZZ==*|

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such 
marks by SHARP is under license. Other trademarks and trade names are those of their respective owners.

The N Mark is a trademark or registered trademark of NFC Forum, Inc. In the United States and in other 

countries.

XL-HF202-302_OM_SUK_EN_A1.indd   1

XL-HF202-302_OM_SUK_EN_A1.indd   1

2013-08-06   08:56:22

2013-08-06   08:56:22