Samsung AH68-00935B 用户手册
GB
22
The timer enables you to switch the system on or off at
specific times.
Example: You wish to wake up to music every morning.
specific times.
Example: You wish to wake up to music every morning.
If you no longer want the system to be switched on or off
automatically, you must cancel the timer.
automatically, you must cancel the timer.
Before setting the timer, check that the current time is correct.
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
options. If you exceed this time, you must start again.
Switch the system on by pressing On/Standby.
Press Timer/Clock until
TIMER
is displayed.
Press Return only on the front panel.
Result:
Result:
ON TIME
is displayed (instead of the equalizer symbols) for
a few seconds, followed by any switch-on time already set;
you can set the timer switch-on time.
you can set the timer switch-on time.
Set the timer switch-on time.
a
Set the hour by tuning the Multi Jog knob to the right or to the left.
b Press Return only on the front panel.
Result: The minutes flash.
c Set the minutes by tuning the Multi Jog knob to the right or to
the left.
d
Press Return only on the front panel.
Result:
Result:
OFF TIME
is displayed (instead of the equalizer symbols)
for a few seconds, followed by any switch-off time already
set; you can now set the timer switch-off time.
set; you can now set the timer switch-off time.
Set the timer switch-off time.
a
Set the hour by tuning the Multi Jog knob to the right or to the left.
b
Press Return only on the front panel.
Result: The minutes flash.
Result: The minutes flash.
c
Set the minutes by tuning the Multi Jog knob to the right or to
the left.
the left.
d
Press Return only on the front panel.
Result:
Result:
VOL XX
is displayed, where
XX
corresponds to the vol-
ume already set.
Press Tuning Down and Up to adjust the volume level and press
Return only on the front panel.
Result: The source to be selected is displayed.
Return only on the front panel.
Result: The source to be selected is displayed.
Turn the Multi Jog knob to select the source to be played when the
system switches on.
system switches on.
If you select...
You must also...
TAPE (cassette)
Insert a recorded cassette in one of the
decks before setting the system to standby.
decks before setting the system to standby.
TUNER (radio)
a Press
Return only on the front panel
.
b Select the FM or AM frequency band by
tuning the
Multi Jog
knob to the right or
to the left.
c Press
Return only on the front panel
.
d Select a preset station by tuning the
Multi Jog
knob to the right or to the left.
CD (compact disc)
a Load one or more compact discs.
b Select the required disc.
b Select the required disc.
Press Return only on the front panel to confirm the timer .
Press On/Standby to set the system to standby mode.
Result:
Result:
is displayed to the bottom left of the time, indicating that
the timer has been set. The system will switch on and off
automatically at the required times.
automatically at the required times.
If the timer switch on and off times are identical, the word
ERROR
is
displayed.
Timer Function
7
8
9
9
5
6
1
2
3
2
3
4
2
6
4,5,7
1,9
6
To set the timer function
You may use Multi Jog or
/
buttons to adjust
in step 4, 5, 6, 7.
3,4,5,6,7,8
MAX-VL45GB-19~27 11/12/02 11:39 AM Page 22