Roadmaster VRVD630 用户手册
5
Radio Operation
VOLUME 25 AM 07:12
FM1
STEREO LOC
RADIO
107.15 MHZ
2
Radio Screen
Selecting the Frequency Band
Press BAND button repeatedly to
select the desired radio band.
Press BAND button repeatedly to
select the desired radio band.
Stereo/Mono
FM listening is generally done in Ste-
reo mode. If the signal is weak or re-
ception is not as good as you would
like, switching to Mono mode usually
improves the overall sound quality. To
switch to Mono mode, press ST (or
MO/ST on the remote control). Press it
again to return to Stereo mode.
reo mode. If the signal is weak or re-
ception is not as good as you would
like, switching to Mono mode usually
improves the overall sound quality. To
switch to Mono mode, press ST (or
MO/ST on the remote control). Press it
again to return to Stereo mode.
Local/Distant
In urban settings, most stations are
strong enough to listening in LOCAL
mode.
However, if a station seems too distant
to be received well, try switching to
DISTANT mode by pressing and hold-
ing ST/LOC (or pressing LOC on the
remote control).
Press it again to return to LOCAL
mode.
In urban settings, most stations are
strong enough to listening in LOCAL
mode.
However, if a station seems too distant
to be received well, try switching to
DISTANT mode by pressing and hold-
ing ST/LOC (or pressing LOC on the
remote control).
Press it again to return to LOCAL
mode.
Selecting Stations
. Press a preset station button -6 to
select a station which has been stored
in the memory.
2. Press and hold the
. Press a preset station button -6 to
select a station which has been stored
in the memory.
2. Press and hold the
or
buttons
until “MANU” appears on the screen,
then press the
then press the
or
buttons to se-
lect a station.
If the buttons have not been pressed
for several seconds, the unit will return
to automatic seek mode.
If the buttons have not been pressed
for several seconds, the unit will return
to automatic seek mode.
Automatic Memory Storage &
Program Scanning
• Automatic Memory Storing
This feature is used to automatically
set up presets for the radio.
. Press and hold the AS/PS to start
the tuner searching the frequency band
(FM, FM2, FM & AM, AM2) and stor-
ing the six strongest stations as pre-
sets.
Program Scanning
• Automatic Memory Storing
This feature is used to automatically
set up presets for the radio.
. Press and hold the AS/PS to start
the tuner searching the frequency band
(FM, FM2, FM & AM, AM2) and stor-
ing the six strongest stations as pre-
sets.
• Program Scanning
After the presets have been recorded,
. Press the AS/PS button and the
radio will scan the preset buttons in
order. It will play a station for a few
seconds, and then move to the next
station.
2. When you hear a station that you
wish to listen to, press the AS/PS but-
ton again to stop the scanning.
After the presets have been recorded,
. Press the AS/PS button and the
radio will scan the preset buttons in
order. It will play a station for a few
seconds, and then move to the next
station.
2. When you hear a station that you
wish to listen to, press the AS/PS but-
ton again to stop the scanning.
• Setting up Presets Manually
To set up the presets manually, tune to
the desired station using the
To set up the presets manually, tune to
the desired station using the
and
buttons.
When you find a station you would like
to save to memory, press and hold the
desired preset button for a few sec-
onds to store it.
to save to memory, press and hold the
desired preset button for a few sec-
onds to store it.
RDS Operation
(Radio Broadcast Data System)
Setting RDS mode
Press AF/REG button to turn the RDS
mode ON/OFF.
Whenever RDS is on, symbol “AF” ap-
pears on the display.
Program name is displayed when re-
ceiving an RDS station.
“AF” starts blinking if the broadcasting
signals getting worse. “ALARM” will be
displayed when an emergency broad-
casting is received, meanwhile sound
output level will be automatically ad-
justed to the preset output level when
the volume level is set at minimum.
Setting RDS mode
Press AF/REG button to turn the RDS
mode ON/OFF.
Whenever RDS is on, symbol “AF” ap-
pears on the display.
Program name is displayed when re-
ceiving an RDS station.
“AF” starts blinking if the broadcasting
signals getting worse. “ALARM” will be
displayed when an emergency broad-
casting is received, meanwhile sound
output level will be automatically ad-
justed to the preset output level when
the volume level is set at minimum.