Motorola FW-C155 用户手册

English

Demonstration mode

The system has a demonstration mode that
shows the various features offered by the system.

To activate the demonstration

● In standby mode, press and holdÇon the

system until "

WELCOME" is displayed.

➜ The demonstration will begin.

To deactivate the demonstration

● Press and holdÇon the system until

DEMO OFF" is displayed.

➜ The system will switch to standby mode.

Note:
– If you have not deactivated the demonstration,
it will resume five seconds after the system
switches to Eco Power standby or standby mode.

Switching the system on

In standby/demonstration mode

● Press STANDBY ON to switch on the last

selected source.

● Press CD 1/2/3, TUNER or

TAPE (TAPE 1/2).

● Press OPEN/CLOSE.

➜ The system will switch to CD mode.

In Eco Power standby mode

● Press ECO POWER to switch on the last

selected source.

● Press CD 1/2/3, TUNER or TAPE 1/2 on the

remote control.

Switching the system to standby
mode

In demonstration mode

● Press and hold Ç on the system.

In any other source mode (except Eco
Power standby mode)

● Press STANDBY ON (or B on the remote

control).
➜ The clock will appear on the display when the
system is in standby mode.

Switching the system to Eco
Power standby mode (< 0.5 Watt)

● Press ECO POWER (or press and hold B on

the remote control).
➜ "

ECO PWR" is displayed, then the display

screen will go blank.
➜ The low power ECO POWER LED will be
lighted.

Dim mode

You can select the desired brightness for the
display.

● In any source mode (except standby mode),

press

DIM MODE repeatedly to select : DIM 1,

DIM 2, DIM 3 or DIM OFF.
➜

DIM

is shown, except for DIM OFF mode.

DIM
mode

OFF

Brightness

normal

half

normal

Spectrum
Analyser

off

Note:
– In standby mode, pressing DIM MODE to select
half or full brightness for clock display.

Basic Functions