Trapeze Networks MP-432 数据表
802.11n dual radio 3x3 MIMO
Indoor access point designed for
low-density deployments requiring
maximum coverage.
Indoor access point designed for
low-density deployments requiring
maximum coverage.
Mobility Point
®
MP-432
DATA SHEET
Mobility Point MP-432
The Mobility Point family
provides access point,
bridging and wireless mesh
services for indoor and
outdoor deployments of
Smart Mobile wireless LANs.
provides access point,
bridging and wireless mesh
services for indoor and
outdoor deployments of
Smart Mobile wireless LANs.
The MP-432 is a high performance 802.11n
(3 x 3) Multiple Input / Multiple Output (MIMO),
dual radio access point, with maximum
aggregate data rates of up to 600 Mbps. It is
designed for low-density deployments requiring
maximum coverage.
(3 x 3) Multiple Input / Multiple Output (MIMO),
dual radio access point, with maximum
aggregate data rates of up to 600 Mbps. It is
designed for low-density deployments requiring
maximum coverage.
It features built-in internal antennas to provide
outstanding coverage and range enhancements
without having to configure “rabbit ear” anten-
nas. One radio operates in the 2.4 GHz band
and the other in the 5 GHz band, with each
radio featuring three radio transmit and receive
chains. 3 x 3 MIMO provides significantly better
range performance over implementations which
use a more limited 2 x 3 system.
outstanding coverage and range enhancements
without having to configure “rabbit ear” anten-
nas. One radio operates in the 2.4 GHz band
and the other in the 5 GHz band, with each
radio featuring three radio transmit and receive
chains. 3 x 3 MIMO provides significantly better
range performance over implementations which
use a more limited 2 x 3 system.
The MP-432 is backward compatible with legacy
802.11a/b/g clients in the 2.4 GHz and 5 GHz
bands to provide investment protection without
the need for a second overlay network.
802.11a/b/g clients in the 2.4 GHz and 5 GHz
bands to provide investment protection without
the need for a second overlay network.
The MP-432 is compliant with the IEEE 802.11n
Draft 2.0 standard, software upgradeable to
the final standard, and tested extensively for
interoperability with 802.11n clients and legacy
802.11a/b/g clients. The MP-432 supports all
relevant encryption methods including WPA2
(Wi-Fi Protected Access 2 based on 802.11i),
WPA (Wi-Fi Protected Access), in both Enterprise
(802.1X) and Personal (pre-shared key) modes.
The MP-432 does not store data, encryption
keys or security credentials locally on the access
Draft 2.0 standard, software upgradeable to
the final standard, and tested extensively for
interoperability with 802.11n clients and legacy
802.11a/b/g clients. The MP-432 supports all
relevant encryption methods including WPA2
(Wi-Fi Protected Access 2 based on 802.11i),
WPA (Wi-Fi Protected Access), in both Enterprise
(802.1X) and Personal (pre-shared key) modes.
The MP-432 does not store data, encryption
keys or security credentials locally on the access
point, and poses no security risk to the organi-
zation if stolen. A stolen MP-432 would be a
useless inoperable device if not connected to an
authorized network.
zation if stolen. A stolen MP-432 would be a
useless inoperable device if not connected to an
authorized network.
The MP-432 also features two 10/100/1000
Ethernet ports for redundant data connectivity
and redundant Power over Ethernet (PoE). The
Gigabit Ethernet ports run in auto-negotiation
mode to seamlessly adapt to the Ethernet infra-
structure. The MP-432 has extensive Power
over Ethernet configuration options to fit the
need of any deployment model.
Ethernet ports for redundant data connectivity
and redundant Power over Ethernet (PoE). The
Gigabit Ethernet ports run in auto-negotiation
mode to seamlessly adapt to the Ethernet infra-
structure. The MP-432 has extensive Power
over Ethernet configuration options to fit the
need of any deployment model.
The MP-432 can be powered by any standards-
based 802.3af, 802.3af+ (draft 802.3at), or
802.3 at power source. If there is little to no
current PoE infrastructure investment, a high
power 802.3af+ device is recommended. If a
significant investment in 802.3af PoE exists,
or for other reasons a significant 802.3af PoE
investment is contemplated, the MP-432 can
operate with full functionality with this infra-
structure. When powered with 802.3af on both
ports simultaneously, the MP-432 operates in
3 x 3 MIMO on both radios. If powered with
802.3af on only, both radios operate in 2 x 3
MIMO mode.
based 802.3af, 802.3af+ (draft 802.3at), or
802.3 at power source. If there is little to no
current PoE infrastructure investment, a high
power 802.3af+ device is recommended. If a
significant investment in 802.3af PoE exists,
or for other reasons a significant 802.3af PoE
investment is contemplated, the MP-432 can
operate with full functionality with this infra-
structure. When powered with 802.3af on both
ports simultaneously, the MP-432 operates in
3 x 3 MIMO on both radios. If powered with
802.3af on only, both radios operate in 2 x 3
MIMO mode.
The MP-432 is compatible with all generations
of Trapeze Networks Mobility Exchange WLAN
controllers, and can be deployed without any
hardware upgrades to the installed base of
controllers.
of Trapeze Networks Mobility Exchange WLAN
controllers, and can be deployed without any
hardware upgrades to the installed base of
controllers.
Mobility Point MP-432