Plantronics 56-K61A-15000 用户手册

8

4. To put the USB Bluetooth adapter into pairing mode, Pinch the pairing/

connect button for at least 2 seconds until adapter flashes red and blue 
and begin pairing with your Bluetooth headset.

5. When both USB adapter and headset are in pairing mode, and within  

30 feet of each other, they should connect.

6. The USB adapter show a solid blue light when connected to the headset.

Take caution when manually pairing the USB adapter. Do not press 

hard. Please “pinch” with both fingers rather than push on the adapter to 
avoid damage to the adapter or USB port.

1. On your PC, launch the 

Sound and Audio Devices from the control 

panel button and select the Audio tab.

2. Under 

Sound Playback and Sound Recording default devices, make 

sure 

Plantronics Bluetooth Adapter is selected.

3. Press 

OK.

1. Make sure the headset is fully charged and powered on (pg. 4) and USB 
adapter is connected to your computer. You must stay within 33 feet of your 
computer to use the headset. 
 
2. Press the headset button for under 1 second to turn microphone on. 
When the headset microphone turns on, you will hear 1 beep and the  
light on the USB adapter will go from solid blue (standby) to flashing  
blue (active). 

When the headset microphone is on, the battery will drain faster than 

when the headset is in standby mode. To preserve battery life/talk time you 
should turn off the headset microphone between uses.

3. When “enrolling” your Calisto microphone for Dragon, pick “Bluetooth” as 

your dictation source.