Eclipse - Fujitsu Ten CD5000 用户手册

30

The main unit lets you select the reception
sensitivity to be used for automatic scanning of
stations. The two sensitivity modes available for
this main unit are LOC mode and DX mode.

ATTENTION

When an optional HD Radio tuner is
connected, reception sensitivity is set to the
LOC Mode. The DX Mode is unavailable.
(U.S.A. only)

The mode switches between LOC
mode and DX mode each time the
buttons are pressed.

The location for the radio bands used between
the North American region and the Asia/
Australia/Latin region can be switched. The
default setting is USA (North America).

ATTENTION

When an optional HD Radio tuner is
connected, radio band location is set to USA.
Other radio band locations are unavailable.
(U.S.A. only)

The radio band switches in the order
shown below each time the buttons
are pressed.

USA 

➔ ASIA ➔ AUS ➔ LATIN 

➔ USA www

After this, the broadcast stations will
be searched for automatically and
stored in the buttons [1] to [6].

LOC Mode

During automatic scanning, the 
reception sensitivity switches 
automatically to one of two levels. 
Initially the reception sensitivity is 
set to the low level so that only 
stations with strong signals are 
received. If no stations could be 
received, the reception sensitivity is 
increased so that stations with 
weaker signals can also be 
received.

DX Mode

Because the reception sensitivity for 
automatic scanning is set to the high 
level from the start, even stations 
with weaker signals can be received. 
(Signal crossover may result in 
some stations being hard to hear.)