Eclipse - Fujitsu Ten CD5000 用户手册

下载
页码 293
84
About optional equipment
How to operate the tuner with an optional SIRIUS 
satellite radio tuner connected (U.S.A. only)
About SIRIUS satellite radio
If the optional SIRIUS satellite radio tuner is
connected, satellite radio broadcast can be
received.
With SIRIUS satellite radio, over 100 channels
are available including music, sports, news, and
entertainment programs.
A channel can be selected from categories such
as POP and ROCK, or by selecting individual
channel manually.
Reception of SIRIUS satellite radio is fee based;
you have to subscribe to it.
It is possible to subscribe through the SIRIUS
radio web site.
URL: http://cdn.sirius.com
ATTENTION
For information about the operation and set-up
of the SIRIUS satellite radio tuner, see the
SIRIUS satellite radio owner's manual.
The main unit will accept up to 24 stations in
memory.
Selecting the radio mode
The mode switches between satellite
radio mode and FM/AM radio mode
each time the button is pressed.
Selecting a channel
Radio bands will switch from SR1 
SR2 
➔ SR3 ➔ SR4 in order each time
the button is pressed.
Turn to the right: Selects 
higher
channel.
Turn to the left: Selects 
lower
channel.
Reception is enabled for all the
channels within the category selected
currently. 
(Refer to page 84 for details on
"Category selection".)
[ ] button:
Starts searching for higher channels.
[ ] button:
Starts searching for lower channels.
Category selection
A channel can be selected from categories such
as POP and ROCK.
Consult the SIRIUS web site for details of
categories.
Categories will switch in the order
shown below each time button is
pressed.
[ ] button:
Advances to the next category.
[ ] button:
Returns to the previous category.
1
Press the [FM AM] button for more
than one second.
1
Press the [FM AM] button for less
than one second to switch to the
desired SR bands.
2
Turn the [SEL] button to the left or
right to tune to a channel.
3
Press the [
] or [
] button for
less than one second to start the
automatic channel search. 
1
Press the [
] or [
] button for
more than one second.