Jensen Tools JHD3510 用户手册
JHD3510
5
BASIC OPERATION
Power On/Off
Press the rotary encoder POWER button (1) to turn the unit on or off. The unit will resume at
the last mode selected (Tuner, Aux, etc.).
the last mode selected (Tuner, Aux, etc.).
Volume Control
To increase the volume, turn the rotary encoder (1) to the right. To decrease the volume, turn
the rotary encoder to the left. While adjusting the volume, the LCD displays a bar graph and
numerical representation of the level. The maximum volume setting is 40.
the rotary encoder to the left. While adjusting the volume, the LCD displays a bar graph and
numerical representation of the level. The maximum volume setting is 40.
Mute
Press the MUTE button (16) on the control panel to mute the audio output. Press MUTE again
to restore the audio output to the previous level.
to restore the audio output to the previous level.
Mode
Press the MODE button (4) on the control panel to select a different mode of operation, as
indicated on the display panel. Available modes include Tuner (AM/FM), SAT Radio, CD, iPod
and AUX In (optional Auxiliary Input).
indicated on the display panel. Available modes include Tuner (AM/FM), SAT Radio, CD, iPod
and AUX In (optional Auxiliary Input).
NOTE: CD, IPOD, or SIRIUS mode will be skipped if the module is not installed.
NOTE: SAT Radio mode will be skipped when the Region menu option is set to “EURO”.
Reset
The reset button should be activated for the following reasons:
•
initial installation of the unit when all wiring is completed
•
function buttons do not operate
•
error symbol on the display
Use a ball point pen or thin metal object to press the RESET button (23). This may be
necessary should the unit display an error code.
necessary should the unit display an error code.
Audio Menu
Press the AUDIO MENU button (3) on the control panel to access the audio menu. You can
navigate through the audio menu items by pressing the AUDIO MENU button repeatedly. Once
the desired menu item appears on the display, adjust that option by turning the rotary encoder
(1) within 5 seconds. The unit will automatically exit the audio menu after five seconds of
inactivity. The following menu items can be adjusted.
navigate through the audio menu items by pressing the AUDIO MENU button repeatedly. Once
the desired menu item appears on the display, adjust that option by turning the rotary encoder
(1) within 5 seconds. The unit will automatically exit the audio menu after five seconds of
inactivity. The following menu items can be adjusted.
Bass Level
Use the rotary encoder (1) to adjust the Bass level range from “-6” to “+6”.
Treble Level
Use the rotary encoder (1) to adjust the Treble level range from “-6” to “+6”.
Balance
Use the rotary encoder (1) to adjust the Balance between the left and right speakers from “12L”
(full left) to “12R” (full right).
(full left) to “12R” (full right).
Fader
Use the rotary encoder (1) to adjust the Fader between the rear and front speakers from “12R”
(full rear) to “12F” (full front).
(full rear) to “12F” (full front).
3
2
4
5
11
6
12
7
13
8
14
9
15
10
16
17
1
22
18
20
21
19
23
POWER