Kenwood KDC-X994 用户手册
English
|
49
“1s” – “99s” : Automatically answers the phone call after
lapse of 1 – 99 seconds.
⁄
• If the time set in the cell-phone is shorter than that set in
the unit, the former will be used.
• This function does not work for call waiting.
• “Bluetooth HF/Audio” (Setting up the Voice Output
Speakers)
Select the speaker which is further from the microphone in
order to prevent howling or echoes.
order to prevent howling or echoes.
• “BT F/W Update” (Displaying the Firmware Version)
Display the version of the firmware of this unit.
For how to update the firmware, access our web site.
http://www.kenwood.com/cs/ce/bt/
For how to update the firmware, access our web site.
http://www.kenwood.com/cs/ce/bt/
Registering Bluetooth device
To make your Bluetooth device (cell-phone) usable
with this unit, you need to register it (pairing). You
can register up to 5 Bluetooth devices to this unit.
with this unit, you need to register it (pairing). You
can register up to 5 Bluetooth devices to this unit.
Registering from this unit
1
Enter Bluetooth mode
KDC-X994
KDC-BT945U
Press the [
] button.
KDC-X794
KDC-MP745U
Press the [PLAY MODE] button for at least 1
second.
second.
✍
You can also select from “Settings” in Menu List
mode.
mode.
2
Enter Bluetooth device registration mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings”
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings”
>
“Detailed Setup”
>
“Device Regist.”.
Search for the Bluetooth device.
When search is completed, “Finished” is displayed.
Search for the Bluetooth device.
When search is completed, “Finished” is displayed.
3
Select a Bluetooth device
Turn the [VOL] knob and press it when the
desired item is displayed.
Turn the [VOL] knob and press it when the
desired item is displayed.
4
“Paring” is displayed (except KCA-BT200)
If “Pairing Success” is displayed, proceed to step 7.
If “PIN Code NG” is displayed, proceed to steps 5
to 6.
If “Pairing Success” is displayed, proceed to step 7.
If “PIN Code NG” is displayed, proceed to steps 5
to 6.
5
Input the PIN code
Operation type
Operation
Select the numbers.
Turn the [VOL] knob.
Move to the next digit.
Press the [
¢] button.
Delete the last digit.
Press the [
4] button.
6
Transmit the PIN code
Press the [VOL] knob for at least 1 second.
If “Pairing Success” is displayed, registration is
completed.
Press the [VOL] knob for at least 1 second.
If “Pairing Success” is displayed, registration is
completed.
✍
If the error message appears even though the
PIN code is correct, try <Registering Special
Bluetooth device>.
PIN code is correct, try <Registering Special
Bluetooth device>.
7
Return to the device list
Press the [MENU] button.
Press the [MENU] button.
8
Exit BT Settings mode
KDC-X994
KDC-BT945U
Press the [
] button.
KDC-X794
KDC-MP745U
Press the [PLAY MODE] button for at least 1
second.
second.
⁄
• This unit allows up to eight digits to be input for a PIN
code. If a PIN code cannot be input from this unit, it can
be input from the Bluetooth device.
be input from the Bluetooth device.
• If there are 5 or more Bluetooth devices registered, you
cannot register a new Bluetooth device.
Registering Special Bluetooth device
Allow registration of a special device that cannot be
registered normally (pairing).
registered normally (pairing).
1. Select Special device registration mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings” > “Detailed Setup” > “SPCL
DVC Select”.
desired item is displayed.
Select “BT Settings” > “Detailed Setup” > “SPCL
DVC Select”.
2. Enter Special device registration mode
Press the [VOL] knob for at least 1 second.
A list is displayed.
A list is displayed.
3. Select a device name
Turn the [VOL] knob and push the center when
the desired device name is displayed.
If “Completed” is displayed, registration is
completed.
the desired device name is displayed.
If “Completed” is displayed, registration is
completed.
4. Go through the procedure step 3 of
<Registering from this unit> and complete
the registration (pairing).
the registration (pairing).
Cancelling Special device registration mode
Press the [MENU] button for at least 1 second.
⁄
• If the device name is not in the list, select “Other Phones”.