Pioneer DEQ-P7050 产品宣传页

•

Try not to bend the optical cable sharply. If it is
necessary to bend it sharply, make sure that the
bending radius is at least 25 mm, otherwise the
cable will not transfer signals properly and so
this unit will not work properly.

•

Route the optical cable so that nothing heavy
rests on it, and so that it cannot be stepped on or
caught in anything – for instance, a door.

•

Make a loop of diameter at least 200 mm with
the remaining optical cable so that the cable does
not get strained.

•

When plugging the optical cable into the unit,
use the supplied cable clamps to prevent the
cable from being bent sharply.

•

Route the optical cable so that it does not get
caught in moving parts such as the gear shift,
hand brake, or seat sliding mechanism. Keep the
cable away from hot spots, such as near the
heater outlet.

To prevent the optical cable from being strained,
use the corrugated tube after cutting it to the cor-
rect length.

The clamp is used to secure the optical cable
when using it. The other clamp is installed on the
back side of the head unit similarly and used to
secure the optical cable.

Optical cable

Clamp

Corrugated tube

Optical cable

•

Before finally installing the unit, connect the
wiring temporarily, making sure it is all connect-
ed up properly, and the unit and the system work
properly.

•

Use only the parts included with the unit to
ensure proper installation. The use of unautho-
rized parts can cause malfunctions.

•

Consult with your nearest dealer if installation
requires the drilling of holes or other modifica-
tions of the vehicle.

•

Install the unit where it does not get in the dri-
ver’s way and cannot injure the passenger if there
is a sudden stop, like an emergency stop.

•

When mounting this unit, make sure none of the
leads are trapped between this unit and the sur-
rounding metalwork or fittings.

•

Do not mount this unit near the heater outlet,
where it would be affected by heat, or near the
doors, where rainwater might splash onto it.

•

Before drilling any mounting holes always check
behind where you want to drill the holes. Do not
drill into the gas line, brake line, electrical wiring
or other important parts.

•

If this unit is installed in the passenger compart-
ment, anchor it securely so it does not break free
while the car is moving, and cause injury or an
accident.

•

If this unit is installed under a front seat, make
sure it does not obstruct seat movement. Route
all leads and cords carefully around the sliding
mechanism so they do not get caught or pinched
in the mechanism and cause a short circuit.

Thoroughly wipe off the surface before affixing
the velcro tape.

Car mat or chassis

Velcro tape

Screw
(4

× 8 mm)

Car mat or chassis

Bracket

Tapping screw (4

× 12 mm)

Drill 2 to 2.5 mm diameter holes.

Rear video output
(REAR VIDEO OUTPUT)
(Yellow)

RCA cables
(sold separately)

RCA cable (supplied)

Optical cable (supplied)

20 pin cable
(supplied with the display)

Yellow

Yellow

Right (Red)

Left (White)

To audio
inputs

Right (Red)

Left (White)

Not used.

AV system display
(e.g. AVX-7300)
(sold separately)

3 m

Video input
(VIDEO INPUT)
(Yellow)

To video
input

RCA cable
(supplied with
the head unit)

Right (Red)

Left (White)

Rear audio output
(DVD REAR MONITOR
OUTPUT)

Right (Red)

Left
(White)

This product

3 m

3 m

Front video output
(FRONT VIDEO
OUTPUT)
(Yellow)

Subwoofer output or non fading
output (SUBWOOFER OUTPUT
or NON-FADING OUTPUT)

IP-BUS cable
(supplied with
the TV tuner)

Hide-away TV tuner
(e.g. GEX-P7000TVP)
(sold separately)

Multi-CD player
(sold separately)

Blue

Black

Red

Green

Green

Black

Blue

Blue

Display with RCA
input jacks

Black

Blue

IP-BUS cable (supplied)

Head unit
(e.g. DVH-P7050)
(sold separately)