Philips CED1900BT 用户手册

36 EN

12 Others

Play external audio/video 

input

You can connect an external audio/video player 

to this system. 

 

1 

Connect a composite AV cable to

•  the AV-IN socket on the front panel, 

and

•  the audio and video output sockets of 

the external player. 

2 

Tap   >   to access the full menu with 

all feature icons displayed.

3 

Tap   [AV-IN1] to display the playback 

interface.

4 

Operate on the external player to start 

play (see the user manual of the external 

device).

Tip

 

•

If you connect this system to an external player through 
the VIDEO IN, AV-IN L, and AV-IN R sockets on the 
rear panel, tap 

 [AV-IN2] to switch the source 

instead of 

 [AV-IN1].

Use rear monitors

If one or two monitors are connected for 

backseat passengers, you can select different 

sources for front and backseat passengers.

Note

 

•

Make sure that rear monitors are correctly connected 

to this system.

 

•

Only when the multi-zone display mode is activated, 

rear monitors can receive signals from the system.

 

•

By default, the same signals are transferred to the front 

and rear monitors.

 

•

When a disc, USB storage device, SD/SDHC card, or 

iPod/iPhone connected through the USB socket is 

selected as the source for front zone, you cannot select 

another source for rear zone.

 

•

Only when the system is in radio mode, navigation 

mode, or Bluetooth mode, you can select a source 

for rear zone from disc, SD/SDHC card, USB storage 

device, or iPod/iPhone connected through the USB 

socket.

1 

Tap   >   to access the full menu with 

all feature icons displayed.

2 

Tap 

.

 

»

The [Rear Zone] menu is displayed.

 

3 

Tap [Mode] to enable or disable the signal 

transferring to rear monitors.

•  [On]: Enable the signal transferring to 

rear monitors.

•  [Off]: Disable the signal transferring to 

rear monitors.

 

»

When it is enabled, the following 

interface is displayed.