Pure Digital CD-40 用户手册
Gr
eat Brit
eat Brit
ain
4
Connecting speakers
When connecting speakers connect the red (positive) terminals on Legato to
the red terminals on the speaker and black (negative) to black. The speaker
cable has a stripe on one strand to aid connection.
Ensure that the bared ends of the wires are securely gripped by the spring
clips. Note that the sound from new speakers should improve over the course
of a few days as they are ‘run-in’.
You can also connect an active subwoofer to the Variable out sockets on your
Legato for enhanced bass. See page 14 for more details.
the red terminals on the speaker and black (negative) to black. The speaker
cable has a stripe on one strand to aid connection.
Ensure that the bared ends of the wires are securely gripped by the spring
clips. Note that the sound from new speakers should improve over the course
of a few days as they are ‘run-in’.
You can also connect an active subwoofer to the Variable out sockets on your
Legato for enhanced bass. See page 14 for more details.
Switch on and off
When you first plug your Legato in it switches to DAB mode and asks you if
you want to perform a UK (UK Band III only) or Full autotune (full Band III)
to find all DAB stations available in your area. These stations are stored in a
station list and ordered alphanumerically.
The first station on the station list is selected.
To switch your unit off (standby) - press the Power button on the unit or
remote control. You see the standby symbol and clock on the screen. Push
the Display button to change between a small clock, large clock and day/date
time display in standby.
To switch your Legato back on press the Power button again. Your unit starts
in whatever mode you were in when you switched off.
you want to perform a UK (UK Band III only) or Full autotune (full Band III)
to find all DAB stations available in your area. These stations are stored in a
station list and ordered alphanumerically.
The first station on the station list is selected.
To switch your unit off (standby) - press the Power button on the unit or
remote control. You see the standby symbol and clock on the screen. Push
the Display button to change between a small clock, large clock and day/date
time display in standby.
To switch your Legato back on press the Power button again. Your unit starts
in whatever mode you were in when you switched off.
Changing the volume
The Volume/Tuning dial operates as a volume control by default except when
you are in a menu or browsing the station or track lists. When you adjust the
volume you temporarily see the volume scale on screen indicating the current
level. You can also use the volume buttons on the remote control to adjust
the volume.
you are in a menu or browsing the station or track lists. When you adjust the
volume you temporarily see the volume scale on screen indicating the current
level. You can also use the volume buttons on the remote control to adjust
the volume.
Navigating menus
You turn the Tuning dial to scroll through menu options or station or track lists
and push to select options. In most menus if you do not select anything you
return to the previous screen. Alternatively use the equivalent remote control
buttons. You can also press a shortcut button to select the option shown on
screen next to that button.
and push to select options. In most menus if you do not select anything you
return to the previous screen. Alternatively use the equivalent remote control
buttons. You can also press a shortcut button to select the option shown on
screen next to that button.
D AB Au t o t u n e M e n u
U K
S
e l e c t D AB r e g i o n :
F u l l
Initial startup screen
V o l u m e
Adjusting volume
Au t o t u n e U K
S
t a t i o n s f o u n d : 2 1
S
c a n n i n g ...
Autotune UK
Nominal impedance 6 ohms
Maximum power rating 30W
Manufactured in China
Part number 12A67
Nominal impedance 6 ohms
Maximum power rating 30W
Manufactured in China
Part number 12A67