Sony CDX-MP70 用户手册
17
01US02CD-U.fm
masterpage:Right
CDX-MP70
3-239-019-21 (1)
Storing only desired stations
You can manually preset desired stations.
1
Press (SOURCE) repeatedly to select
the radio.
the radio.
2
Press (MODE) repeatedly to select the
band.
band.
3
Press the –m or M+ button to tune
in the station that you want to store.
in the station that you want to store.
4
Press (MENU), then rotate the
./> control dial until “Preset
Edit” appears.
./> control dial until “Preset
Edit” appears.
5
Press the ./> control dial.
6
Rotate the ./> control dial to
select the number that you want to
store.
select the number that you want to
store.
7
Press the ./> control dial.
The stored station indication appears in the
display.
The stored station indication appears in the
display.
8
Press (MENU) twice.
Note
If you try to store another station on the same stored
number, the previously stored station will be erased.
If you try to store another station on the same stored
number, the previously stored station will be erased.
Operating with the card remote
commander
commander
1
Press (SOURCE) repeatedly to select
the radio.
the radio.
2
Press (MODE) repeatedly to select the
band.
band.
3
Press (SEEK -) or (SEEK +) to tune in
the station that you want to store.
the station that you want to store.
4
Press the desired number button ((1)
to (6)) until “MEM” appears.
to (6)) until “MEM” appears.
Storing station names
— Station Memo
You can assign a name to each radio station and
store it in memory. The name of the station
currently tuned in appears in the display. You can
assign a name using up to 8 characters for a
station.
store it in memory. The name of the station
currently tuned in appears in the display. You can
assign a name using up to 8 characters for a
station.
Storing the station names
1
Tune in a station whose name you
want to store.
want to store.
2
Press (MENU), then rotate the
./> control dial until “Name Edit”
appears.
./> control dial until “Name Edit”
appears.
3
Press the ./> control dial.
4
Enter the characters.
1
Rotate the ./> control dial to
select the desired character.
select the desired character.
A
y
B
y
C
...
y
0
y
1
y
2
...
y
+
y
–
y
*
...
y
*
y
A
* (blank space)
2
Press the M+ button after locating
the desired character.
the desired character.
If you press the –m button, you can
move back to the left.
move back to the left.
3
Repeat steps 1 and 2 to enter the
entire name.
entire name.
5
Press the ./> control dial.
Tips
• Simply overwrite or enter “
• Simply overwrite or enter “
” to correct or erase a
name.
• There is another way to start storing station names:
Press (LIST) for 2 seconds instead of performing
steps 2 and 3. You can also complete the operation
by pressing (LIST) for 2 seconds instead of step 5.
steps 2 and 3. You can also complete the operation
by pressing (LIST) for 2 seconds instead of step 5.
• If no memory is remaining, “Mem Full” appears in
the display, and you cannot assign a station name.
./> control
dial
dial
continue to next page
t
00US+00COV-U.book Page 17 Friday, December 7, 2001 12:24 PM