TEAC LPR500 用户手册

Erase procedures are possible only on an unfinalized CD-RW disc.
If a CD-RW disc has been finalized, unfinalize it prior to erasure.
Note  that  it  is  not  possible  to  perform  any  erase  or  unfinalize 
procedures on a CD-R disc.

It  is  possible  to  erase  the  last  recorded  track.  It  is  also  possible  to 
erase a whole disc.

1

2

3

Each  time  the  FINALIZE/ERASE  button  is  pressed,  the  display 
changes as follows:

“UnFINAL” (unfinalize) appears when a finalized disc is loaded.
“FINAL”  appears  when  the  disc  has  not  been  finalized.  If  you 
press the FINALIZE/ERASE button again, “ErASE” and the last track 
number will appear.

UnFINAL
Select this to unfinalize the disc.

ErASE  XX  (the  number  of  the  last  track  recorded  on  the 
disc)
Select this to erase the last track on the disc.

<  This will not appear when only one track is recorded on the disc.

ErASE ALL
Select this to erase all the tracks.

<  To erase a number in a finalized CD-RW, unfinalize (UnFINAL) first 

and  then  erase  the  number  by  the  same  procedure  (ErASE  or 
ErASE ALL).

<  To  cancel  the  erasing  or  unfinalizing  process,  press  the  STOP 

button (H).

4

The remaining time for the operation appears in the display.
When the operation has been finished, the display returns to the 
track/time display.

During erasing/unfinalizing, no buttons will work.
Never turn the power off nor unplug the power cord.

<  This operation cannot be undone. If you are going to erase a track 

or tracks, make sure that they are recordings that you really want 
to erase.