Ericsson RX1290 用户手册

下载
页码 176
 
Menus
 
Table C.6  TTV G.703 Menu 
Display Title: Input 
Description
 
STATUS 
PDH Rate  
XXXXX 
XXXXX is the framing mode of the TTV G.703 input module (None, C-Bit, 
M13)  
RANDOMISATION XXXX 
STUFFING PKTS YYYY 
XXXX  (ACTIVE, NOT ACTIVE) 
YYYY (PRESENT, NOT PRESENT) 
SETUP 
REED-SOLOMON DECODER 
XXXXX 
XXXXX is the EDITABLE Reed-Solomon option. (DISABLED, ENABLED) 
INTERLEAVER 
XXX 
XXX.X is the EDITABLE Interleaver option  (DISABLED, ENABLED) 
INPUT SENSITIVITY 
XXXX 
XXXX is the EDITABLE Signal Level option (NORMAL, LOW) 
C.5.5 
10/100BaseT IP Input Option Menu 
When a 10/100BaseT input interface is used, the Input menu allows the user to edit 
the set-up parameters  
Table C.7  IP Input Menu 
Display title: Input 
Description
 
STATUS 
Last IP Received From  
XXXX.XXXX.XXXX.XXXX 
XXXX.XXXX.XXXX.XXXX is the IP address the last MPEG-2 packet was 
received from. 
Encapsulation Mode 
YYYY 
YYYY (UDP ONLY, RTP ONLY, RTP FEC MODE) 
XXXX 
XXXX  status (NO DATA, LINK DOWN, OUT OF REGULATION) 
SETUP 
UDP PORT NUMBER 
XXXXX 
XXXXX shows the EDITABLE UDP Port Number on which the IP Input 
Card is listening for packets. 
IP ADDRESS 
XXXX.XXXX.XXXX.XXXX 
XXXX.XXXX.XXXX.XXXX is the EDITABLE IP address of the IP input 
card. 
NETWORK MASK 
XXXX.XXXX.XXXX.XXXX 
XXXX.XXXX.XXXX.XXXX is the EDITABLE subnet mask of the IP input 
card. 
DEFAULT GATEWAY 
XXXX.XXXX.XXXX.XXXX 
XXXX.XXXX.XXXX.XXXX is the EDITABLE gateway address of the IP 
input card. 
MULTICAST IP ADDRESS 
XXXX.XXXX.XXXX.XXXX 
XXXX.XXXX.XXXX.XXXX is the EDITABLE multicast IP address of the IP 
input card. 
EN/LZT 790 0003/2 R1A
 
 
 
 
C-9