Ericsson RX1290 用户手册
Installing the Equipment
2.7.2
ASI/HD-SDI/SD-SDI OUT
The unit has three ASI/SMPTE 292M video (HD-SDI)/656 video
(SD-SDI) outputs in the standard configuration.
(SD-SDI) outputs in the standard configuration.
The output standard must be selected from the user interface or
remote control interface.
remote control interface.
The ASI/HD-SDI/SD-SDI output is coaxial via BNC connectors.
Video control is through the Video Menu (Menu 3.1).
Video control is through the Video Menu (Menu 3.1).
Table 2.3 Digital Output Connector
ASI/HD-SDI/SD-SDI
OUT 1/2/3
Item Specification
Connector type
BNC 75
Ω female socket
Connector designation
ASI/HD-SDI/SD-SDI OUT 1
ASI/HD-SDI/SD-SDI OUT 2
ASI/HD-SDI/SD-SDI OUT 3
ASI/HD-SDI/SD-SDI OUT 2
ASI/HD-SDI/SD-SDI OUT 3
Pin-outs
Centre
Shield
Shield
Video output
Ground/Chassis
Ground/Chassis
Note: These sockets are under the control of Menu 5.1
2.7.3
CVBS
A BNC socket is provided for composite video output which
supports NTSC(M) (with and without pedestal) and
PAL(B,D,H,I,M).
supports NTSC(M) (with and without pedestal) and
PAL(B,D,H,I,M).
Table 2.4 Digital Output Connector
CVBS
AUDIO 1 / 2
5
1
6
9
Item Specification
Connector type
BNC 75
Ω female socket
Connector designation
ASI/HD-SDI/SD-SDI OUT 1
ASI/HD-SDI/SD-SDI OUT 2
ASI/HD-SDI/SD-SDI OUT 3
ASI/HD-SDI/SD-SDI OUT 2
ASI/HD-SDI/SD-SDI OUT 3
Pin-outs
Centre
Shield
Shield
Video output
Ground/Chassis
Ground/Chassis
2.7.4
Audio Outputs
A pair of 9-way male D-type connectors provide two stereo
channels. Each connector carries a single channel of a stereo
pair in both analogue and balanced digital form.
channels. Each connector carries a single channel of a stereo
pair in both analogue and balanced digital form.
Audio control is through the Service Menu (Menu 3).
EN/LZT 790 0003/2 R1A
2-11