Linear HDMI-DA-2X8M 用户手册

Connect the supplied cable from the HDTV HDMI source into the HDMI input port 

1. 

1 

of the 2:8 Distribution Amplifier For HDMI.

Connect a second HDTV HDMI source to HDMI input port 2 on the 2:8 Distribution 

2. 

Amplifier For HDMI using a user supplied HDMI cable.

Connect the display(s) (up to eight) to the HDMI output port(s)* of the 2:8 

3. 

Distribution Amplifier For HDMI using user supplied cable(s)

Plug the 24V DC power supply into the 2:8 Distribution Amplifier For HDMI.

4. 

NOTE:  *Display information (EDID) is sent from the display connected to 

HDMI Output Port 1 to both of the sources connected to the 2:8 Distribution 

Amplifier for HDMI. If there is no display connected to HDMI Output Port 1, the 

remaining HDMI Output Ports will be scanned in succession and use the first 
EDID that it detects. The source will output resolutions and timings according the 

EDID that is being fed by the 2:8 Distribution Amplifier for HDMI. Therefore, all of 
the  connected displays must be capable of accepting the timings and resolution 
output by the source.  It is recommended that the display with the lowest native 

resolution be connected to HDMI output port 1. This is to ensure that a compatible 
video signal will be able to be displayed on all connected monitors.

Switching between the inputs on the 2:8 Distribution Amplifier for HDMI is done using 
either the supplied RMT2-IR remote or the RJ11 to serial interface. 

Pressing button one on the remote will select the HDMI source that is connected to 

HDMI input port one. Pressing two on the remote will select the HDMI source that is 

connected to HDMI input port two. 

Please see the diagram on page 7 for the RJ11 serial control interface pin configuration.