Sony Car Amplifier 规格指南

下载
页码 2
2002 SONY MOBILE
   
PRODUCT GUIDE
Design and Specifications subject to change without notice.
• 1200W Max Power
•
 300W x 1 into 4W, 5-300Hz, @ 0.2%THD
•
 600W x 1 into 2W, 5-300Hz, @ 0.6%THD
•
 1000W x 1 into 1W, 5-300Hz, @ 1.2%THD
•
 Class D Mono Subwoofer Amplifier
• MOSFET Outputs
• MOSFET Power Supply
• High Current 1W Stability
• Variable 50-300Hz Low Pass Filter
• 40 HZ EQ Boost, RCA Output
• RCA and Speaker Level Inputs
•
 Indicates step-up
XM-1600GSD
Mono Class D Amplifier
Other Specifications
Circuit system 
OTL (output transformerless) circuit
Pulse power supply
Inputs 
RCA pin jacks
High level input connector
Outputs 
Speaker terminals
Through out pin jacks
Speaker impedance 
1 – 8W
Maximum outputs 
600 W (at 4W)
1200 W (at 2W)
Rated outputs (supply voltage at 14.4 V)
300 W (20 Hz – 300 Hz, 0.2% THD, at 4W)
600 W (20 Hz – 300 Hz, 0.6% THD, at 2W)
1000 W (20 Hz – 300 Hz, 1.2% THD, at 1W)
Frequency response 
5 Hz – 300 Hz ( +0.5 dB, -3 dB)
Harmonic distortion 
0.06% or less (at 100 Hz, 4W)
Input level adjustment range
0.2 – 6.0 V (RCA pin jacks)
0.4 – 12.0 V (High level input)
Low-pass filter 
50 – 300 Hz, –18 dB/oct
Low boost 
0 – 10 dB (40 Hz)
Power supply voltage 
10.5 – 16 V
Current drain 
at rated output : 40 A (4W)
Remote input : 2 mA
Dimensions 
Approx. 358 × 50 × 264 mm (w/h/d)
14 1/8 × 2 × 10 1/2 in.) not incl.
projecting parts and controls
Mass 
Approx. 3.5 kg (7 lb. 11 oz.) not incl. accessories
Supplied accessories 
Mounting screws (4)
Audio Power Specifications
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
300 watts minimum continuous average power into 4 ohms, 20 Hz to
300 Hz with no more than 0.2% total harmonic distortion per Car
Audio Ad Hoc Committee standards.