Carson SA-441-83FX 用户手册

 

TB0335B 

Page 2 of 10 

10/18/03 

11-16 Volts DC, 8 Amps DC per 100W Speaker 

Power off current to amplifier is 1mA Max. 

15 VDC input, 100W speakers 
Two outputs - 105 Watts RMS per output 

14 VDC input, 100W speakers 
Two outputs - 40 Watts RMS per output 

700Hz - 1450Hz  Nominal 

 
CYCLE RATES: 

WAIL - 15 cycles/min 

 

YELP - 210 cycles/min  

 

PHASER - 10 cycle/sec 

200Hz - 10KHz +/-3db 

 

Harmonic Distortion Less than 3% @ 1KHz 

 
RADIO INPUT 
SENSITIVITY: 

0.75VAC Input Min. for 40 Watts RMS Output (1 spkr) 

 
OPERATING 
TEMPERATURE: 

-15° F  to +140° F 

 
SIZE: 

Amplifier 

9" Wide X 2-1/2" High X 6-3/4" Deep 

 

Control Head  6-1/4" Wide X 2-7/8" High X 1" Deep 

 
WEIGHT: 

Amplifier 4.25 

pounds 

 

Control Head  1 pound 

 
NIGHT VISIBILITY: 

Control Head panel is backlit with independent lead tied to vehicle dash lights. 

 
AMPLIFIER PROTECTION: 

High Voltage – Siren output stops with input voltage above highest rating 

     

 

Stops high output power from blowing speaker 

Reverse Polarity – Fuse(s) blows when power is wired backwards 
Shorted Output – Fuse(s) blows if speaker shorts (a common problem) 

 

No fuse but has reverse polarity protection. 

 
 
 
 

Due to continuous product improvements, we must reserve the right to change any specifications and information, 
contained in this manual at any time without notice. 
Carson Manufacturing Co., Inc. makes no warranty of any kind with regard to this manual, including, but not limited to, 
the implied warranties of merchantability and fitness for a particular purpose. 
Carson Manufacturing Co., Inc. shall not be liable for errors contained herein or for incidental or consequential 
damages in connection with the furnishing, performance, or use of this manual.