Eclipse - Fujitsu Ten CD5433 用户手册
76
How to operate the receiver with an optional DSP/EQ unit connected
[SOUND] button
Buttons [1] to [6]
[RTN] button
Selecting a preset pattern from memory
Press a preset button to select the room size in memory.
The buttons under which room sizes are stored in memory are
called preset buttons.
The buttons under which room sizes are stored in memory are
called preset buttons.
Press a button, [1] to [6] for less than two seconds
while in the DSP mode.
while in the DSP mode.
The room size, as preset in the button, is selected.
Press the [RTN] button.
At this time, other adjustments can also be made in Sound
Adjustment Mode.
Adjustment Mode.
Press the [SOUND] button to exit Sound Adjustment
Mode.
Mode.
3
2
1
Reverberation
Initial echo delay
Long
Time
Initial echo
Reverberation duration
Direct (original sound)
Level
High
Hold down a button, [1] to [6], for more than two
seconds to preset a value.
seconds to preset a value.
The preset value is overwritten by the value set using the
above steps.
above steps.
4
Press the [RTN] button.
At this time, other adjustments can also be made in Sound
Adjustment Mode.
Adjustment Mode.
Press the [SOUND] button to exit Sound Adjustment
Mode.
Mode.
The adjustment mode will be canceled and the selected
room size will now take effect.
room size will now take effect.
6
5