Eclipse - Fujitsu Ten CD5433 用户手册
90
Mounting instruction
Names of lead wires and destinations (refer to Page 92)
No.
Name
Wire color
Destination
1
ACC
Red
Connect where the power comes on
when the ignition is in the ACC
position.
when the ignition is in the ACC
position.
2
B+
Yellow
Connect where the power is constantly
available, regardless of the ignition
switch's position.
available, regardless of the ignition
switch's position.
3
Ground
Black
Connect where good body grounding
is available.
is available.
4
Antenna power supply Blue
Connect to the automatic-antenna
control terminal of the vehicle.
control terminal of the vehicle.
5
Lamp power supply
Orange/White
Connect to where power comes on
when the headlights are turned on.
when the headlights are turned on.
6
Control power supply
Blue/White
Connect to the control terminal for
the external amplifier, etc.
the external amplifier, etc.
7
E-LAN terminal
Connect to the E-LAN terminal of the
CD changer, DSP, etc.
CD changer, DSP, etc.
8 & 9
Line-in/out terminals
Connect to the RCA input connectors
of an external amplifier,or to the RCA
output connectors of a DSP or EQ.
of an external amplifier,or to the RCA
output connectors of a DSP or EQ.
10
Line-out terminals (Nonfader)
Connect to the RCA input connectors
of a DSP or EQ, or the RCA connectors
of a woofer amplifier.
of a DSP or EQ, or the RCA connectors
of a woofer amplifier.
11
Speaker terminals
Connect them to their respective
speakers.
speakers.
12
Cellular phone mute
Pink
Connect to the ground output terminal
on a mobile phone.
on a mobile phone.
13
Digital out terminal
Connect to digital input terminal of the
Eclipse Commander module.
Eclipse Commander module.
14
Eclipse Commander terminal
Connect to the Eclipse Commander
module.
module.
15
Line in terminal
Connect to the mini plug (
φ3.5)
output connector of Portable unit
(MP3 player, MD player, etc).
O Note O
To prevent unconnected leads from shorting out, insulate them
by wrapping their tips with electrical tape. Similarly, insulate the
ends of connected leads.
If an external amplifier is to be connected to the receiver, be
sure to ground its outside housing to the vehicle body (a metal
part).
by wrapping their tips with electrical tape. Similarly, insulate the
ends of connected leads.
If an external amplifier is to be connected to the receiver, be
sure to ground its outside housing to the vehicle body (a metal
part).