Motorola DSR-6400 用户手册

Use the following procedure to set and view the Input GigE IP address of the unit. Press the  

buttons until the GigE Input IP Address menu appears. Use this menu to enter an IP address and 
Port for the incoming GigE source stream. The address is represented in the common dotted-
decimal format. Contact the network administrator for details about configuring the GigE input 
port for the desired source stream.

Press the 4 button until the cursor is at the IP Address label, and press ENTER to move into the 

field. Use the arrow buttons (4) to enter the desired address and then press ENTER to 

Use this section to select one of the eight RF input ports so that the unit can acquire the DigiCipher 
II system signal and automatically download network data required for operation. 

Because many satellite broadcasters use standard C-band transponder center frequencies, 
selecting a transponder number is the default tuning mode. Use the Xpndr option in the Mode 
field and edit the Xpndr (transponder) field (described on page 33), for tuning such signals

.

For

 

offset-frequency C-band, fractional transponders, or Ku-band satellite broadcasts, use the 

LFreq field in the Mode field (described on page 34), and directly edit the L-band frequency field. 

The unit does not actually require any distinction between C-band and Ku-band satellite signals in 
order to tune and acquire a compatible signal. However, correct modulation information is 
necessary. For details on modulation, see “Modulation Menu” on page 35.

The Input field displays the active input. To select the input:

Press the4 button until the cursor is at the Input label and press ENTER. Press the  buttons to 

scroll to the input that is connected. Unless changed, the unit displays Port 1. Press ENTER to confirm 
the selection and return to the top line of the menu. If Port 1 through Port 8 is selected, then use the 
arrow buttons (4) to specify the other fields (Mode field, Xpndr field, and Lfreq field) as 

needed. These three fields are not visible when ASI In or GigE In is selected.

   E         239.001.001.001    00000

GigE Input  IP Address       Port 

   E         Port 1  Xpndr 01      1430.00

MANUAL TUNE Input Mode Xpndr LFreq