Motorola DSR-6400 用户手册

DSR-6400 Series

ASI Output Rate Menu

Press the  buttons until the ASI Output Rate menu appears. Use this menu to designate the

unit’s ASI output rate.

Note: The unit has two ASI output ports on the back panel:

ASI OUT 1: The unit passes-through only the input MPEG programs that the unit is processing
(refer to the Channel Menus). In either case, the processed programs are decrypted.

ASI OUT 2: The unit also converts selected input MPEG-4 programs to both an MPEG-2 HD
(High Definition) program and an MPEG-2 SD (Standard Definition) program. These input
programs are selected using the Channel menus.

ASI1 Field

Default: 78

To select the data rate (Mbps) of the ASI OUT 1 on the back panel, press the 4 button until the

cursor is at the ASI1 label, and press ENTER to move into the field. Press the  buttons to

display the options: 19.5, 39, and 78.
Note: The unit formats the ASI OUT 1 on the back panel in either the byte mode or the packet

mode. The unit automatically selects one of the two format modes for the best compatibility with

the devices receiving the ASI output.

Byte Mode

The unit formats the ASI output in the byte mode when the selected ASI

output data rate is 54 Mbps or less.

Packet Mode

The unit formats the ASI output in the packet mode when the selected ASI

output data rate is greater than 54 Mbps.

ASI2 Field

Default: 27 (DSR-6401); 54 (DSR-6402); 81 (DSR-6403); 108 (DSR-6404)

To select the data rate (Mbps) of the ASI OUT 2 on the back panel, press the 4 button until the

cursor is at the ASI2 label, and press ENTER to move into the field. Press the  buttons to

display the options: 27, 54, 81, and 108.
Note: The unit formats the ASI OUT 2 on the back panel in either the byte mode or the packet