Motorola DSR-6400 用户手册

DSR-6400 Series 

This menu only applies to RF input. Press the  buttons until the STATUS2 menu appears. This 

screen displays the source name, channel number, and the signal quality of the incoming signal. 

This status-only field displays the source name, which was entered by the programmer or network 
operator at the encoder/uplink to identify the source. Dashes are displayed when no information

 

is available.

This status-only field displays the selected Virtual Channel number (from the Channel menu). 
Dashes are displayed when no information is available.

This status-only field displays a number from 1 to 100 so that the quality level of the signal can be 
judged. The signal quality is also displayed as a large bar graph in the Status3 menu. If it is 35 or 
less, take action at your site to increase the dish size or improve the Low Noise Block (LNB) to 
prevent occasional loss of output. 

This menu only applies to RF input. Press the  buttons until the STATUS3 menu appears. This 

screen displays the quality level of the signal as a large bar graph that expands to fill the entire LCD 
screen. The following example shows the quality at about 75.

   E       ---

----

---

STATUS2  Source      Channel   Quality

   E      |||||||||||||||||||||||.......

STATUS3  Signal Quality