Panasonic CQ-VD7500U 用户手册
85
69
E
N
N
G
L
I
S
H
H
CQ-VD7700U/VD7500U
84
68
E
N
N
G
L
I
S
H
H
CQ-VD7700U/VD7500U
Troubleshooting
(continued)
If the Unit Begins to Malfunction...
Reset switch
Insert a hard, slender stick into the hole and push the switch.
Insert a hard, slender stick into the hole and push the switch.
Important
Push the switch only when the unit fails to operate with any buttons. (Stored settings and adjustments are not cleared.)
If the unit fails to return to normal condition, call the nearest Panasonic Servicenter and ask for repairs.
Push the switch only when the unit fails to operate with any buttons. (Stored settings and adjustments are not cleared.)
If the unit fails to return to normal condition, call the nearest Panasonic Servicenter and ask for repairs.
Hide-away Unit
Reset switch
Note: If the ID-CODE has been already set, you will be asked to enter the ID-CODE right after the unit is restarted.
- E4 -
Error Display Messages
- E3 -
NO DISC
Display
Possible cause
a
Possible solution
- E1 -
- E2 -
■
CD/MP3/DVD/Video CD/CD Changer/SD-Card
REGION ERROR
NO MAGAZINE
Disc is dirty, or is upside down.
a
Check disc.
Disc has scratches.
a
Check disc.
No operation by some cause.
a
Press [u]. If failure persists, press the reset switch. (Press the reset
switch in the CD changer). If normal operation is not restored, call the
store where you purchased the unit or the nearest Panasonic
Servicenter.
switch in the CD changer). If normal operation is not restored, call the
store where you purchased the unit or the nearest Panasonic
Servicenter.
The type of the file that is selected is not supported.
a
Check disc.
No disc is in the player.
a
Insert disc into the disc slot.
No magazine is in the changer.
a
Load the changer with CD-loaded magazine.
An attempt was made to play a disc with a region number other than “1” or
“ALL”.
“ALL”.
a
Press [u] and check the disc.
Notes:
¡
¡
There may be cases when the disc numbers affected by an error are displayed before E1 and E2.
¡
Displays and the steps to be taken for errors vary in part from changer to changer. For details, refer to the Operating
Instructions for the changer used.
Instructions for the changer used.
NO FILE
The unit cannot recognize the play file, or there is no file on the SD card.
a
Ensure that the file name is proper and MP3/AAC files are recorded
with SD-Jukebox.
with SD-Jukebox.
NO CARD
No card is inserted into the card slot, the card is not inserted until it clicks,
or the card is defective.
or the card is defective.
a
Make sure of card insertion.
X
You are trying to play incompatible or corrupted data. These data cannot be
played.
played.
a
Check the SD-Card.
CHECK CARD
The card cannot be played.
a
Check the SD-Card.