ONKYO C-773 用户手册

 

9

 

Use the supplied analog audio cable to connect the 
C-733’s ANALOG OUT L/R jacks to the analog input 
jacks on the amplifier, as shown.
To use the 

 system functions, use the supplied 

 

cable to make an 

 connection.

 

• The C-733 has two 

 jacks. They’re both the same, 

so you can use either one.

• To use 

, you must make an analog audio connec-

tion between the C-733 and the other component.

• Use only dedicated 

 cables for 

 connections.

• If you use the C-733 with other components from the 

Onkyo Separate Collection, refer to the instruction 
manuals supplied with the A-933 as well.

 

.

 

If your amplifier or recorder has an optical digital audio 
input, you can enjoy digital playback or recording.
Use an optical digital audio cable to connect one of the 
C-733’s OPTICAL DIGITAL OUT jacks to an optical 
digital input jack on the amplifier or recorder, as shown.

• Always refer to the instructions that came with the 

component that you are connecting.

• Do not plug in the power cord until all connec-

tions have been properly made.

• Do not bind audio cables with power cords and 

speaker cables. Doing so may adversely affect the 
sound quality.

The optical digital jacks are fitted with protective 
caps. Before connecting a cable, remove the cap and 
keep it safely. When you disconnect the cable, put 
the cap back in.

• Red connectors are used for the right channel, and 

white connectors are used for the left channel.

• Push each plug in all the way to make a good con-

nection (loose connections can cause noise or mal-
functions).

Supplied cable

Supplied cable

Connect one or the other

Both jacks output the 
same signal

*En_C733_02.fm Page 9 Wednesday, December 22, 2004 3:07 PM