ONKYO CR-425UKD 用户手册

44

• You can also use the CD receiver’s PRESET 

[

t]/[1] button to select the DAB stations.

The operation of the PRESET [

t]/[1] buttons can 

be changed.
Press and hold the Stop [

2] button for 3 seconds until 

“Preset Mode” or “Station Mode” appears on the display.

Press the remote controller’s [DISPLAY] button repeat-
edly to display more information about the selected 
DAB station.
You can also use the CD receiver’s [DISPLAY] button to 
display this information.

When tuned to a station that’s broadcasting DLS text 
data, the text will scroll across the display.

Displays the type of program.

Displays the station’s bit rate and audio mode (ste-
reo, mono, or joint stereo).

Displays the signal quality.
0–59: Poor reception
60–79: Good reception
80–100: Excellent reception

Displays the name of the current multiplex.

Displays the number and frequency of the current 
multiplex.

5]/[4] buttons to 

select the DAB stations.
If a secondary service is available, a 
right angle bracket (>) is displayed. 
Press the Fast Forward [

4] button to 

listen to the secondary service.

While the secondary service is selected, 
a left angle bracket (<) is displayed. 
Press the Rewind [

5] button to 

return to the primary service.

When you select a station that you’ve 
selected a lot in the past, the letter F 
(short for Favorite) is displayed.

If you select a station that cannot be 
received properly, a question mark (?) 
is displayed.

Station Mode: Select DAB station (default).
Preset Mode: Select Preset (see page 48).

“F”

“?”

(Scroll)