ONKYO CR-425UKD 用户手册

56

To return to step 1 and start timer programming all over 
again, press the [MENU/NO] button at any point in this 
procedure.

7]/[6] 

buttons to select the day, and then 
press [ENTER].
You can select: SUN, MON, TUE, WED, 
THU, FRI, or SAT.
Go to step 10.

7]/[6] 

buttons to select the day, “Every-
day”, or “Days Set”, and then 
press [ENTER].
You can select the following:

7]/[6] 

7]/

6] buttons again to select the 

You can select only consecutive days.

7]/

6] buttons to specify the On 

You can also use the remote controller’s 
number buttons to enter the time. For 
example, to enter 7:29, press [7], [2], and 
[9].

• Once the On time is set, the Off time is 

automatically set to one hour later.

• To ensure that the first few seconds of a 

program are recorded when using timer 
recording, set the On time slightly ahead 
of the program’s start time (about 1 
minute).

SUN

TUE

MON

Days Set

Everyday

WED

THU

SAT

FRI

7]/

6] buttons to specify the Off 

7]/

6] buttons to specify the CD 

The default setting is 10.
If you want to use your normal volume 
level setting for the timer, press the Pre-
vious [

7] button repeatedly until 

“TimerVol.Off” appears on the display. 
In this case, the timer will use the volume 
level that was set before the CD receiver 
was set to Standby.

• Be sure to set the CD receiver to Standby, 

otherwise the timed operation will not 
work.

• While a timed operation is in progress, 

you can cancel it by pressing the 
[TIMER] or [SLEEP] button.

• While timed recording is in progress, the 

output of the CD receiver is muted. To 
hear what’s being recorded, press the 
[MUTING] button. Press it again to mute 
the CD receiver.

• Memory, random, and 1-Folder playback 

cannot be used with the timers.

TIMER indicator

Number of 
programmed 
timer

Underscore indicates 
timer programmed for 
recording