Sanyo VCC-MD800 用户手册

− 34 −

(Only VCC-MD700/800 series)

When this function is set to ON, the digital zoom 

magnifies the screen. When vibrations are detected, 

the vibrations are stabilized by changing the position 

of the screen captured by the zoom.

Stabilizer level and digital zoom magnification

When changing the stabilizer level, the magnification 

of the applied digital zoom is changed. Therefore, 

increasing the stabilizer level allows the camera to 

adjust to stronger vibrations. However, the screen 

resolution decreases. 

The relation between the level of stabilization and the 

digital zoom magnification is as follows. 

Low

Approximately x1.05

Middle

Approximately x1.1

High

Approximately x1.2

Frequency that can be stabilized 
This function corrects vibrations between 5Hz – 15Hz.

However, depending on the strength of the vibration 

or the stabilizer level, some vibrations within this 

frequency range may not be stabilized. 

To clarify the image when using the stabilizer 
To clarify the image when using the stabilizer, set the 

shutter speed to approximately 1/250.

If the shutter speed is slow, the images captured 

before the digital zoom is applied will be blurred and 

the effect of the stabilizer decreased.