Samsung SCC-B5353SN 用户手册

ENG

Components of your camera

Your camera has the following components:

1. Cover dome: Covers the inner cover, lens, and main

body to protect them.

2. Inner cover: Covers the main body to protect it.

3. Wing locker: Push a long thin screwdriver into its

narrow spot and press it outward when you want to

remove the inner cover.

4. Main body: Includes a lens, a switch board, a PCB

board, screws, and such.

5. Mount bracket: Used as a ceiling or wall ﬁxture. It

is ﬁxed using three long tab screws provided in the

package.

6. Ceiling mount opener: Remove it for line connection

to the ceiling when it is installed on the ceiling.

7. Zoom lever: Using this lever, the lens zoom can be

adjusted and ﬁxed.

8. Focus lever: The lens focus can be adjusted by

rotating it left or right. Rotate it clockwise for ﬁxing.

9. Tilt ﬁxing screw: Using this screw, the slope of the

lens can be adjusted and ﬁxed.

10. Switch board: Includes two kinds of control switches

such as function switches and phase-control switches.

The board has eight function switches in the middle

and two phase-control buttons on each side of the

function switch area.

11. Groove mark: To attach the Main body to the Mount

bracket, align this groove mark on the Main body with

the wide groove in the CAMERA FRONT side on the

Mount bracket.

12. Locker: Used to open or close the Cover dome. To

open the cover dome, press the locker.

13. Lock releaser: Push it outward and rotate the main

body in UNLOCK direction when you want to remove

the

Mount bracket from the Main body or to remove

the installed camera from the Mount bracket.

14. Cable: Connect the Video connector to BNC cable

and Power connector to power adapter.

Lens

9 0

Power connector

Video connector

7 8

AB68-00648C(01)Eng.indd 9

2007-03-19 ¿ÀÀü 10:34:43