Grandstream Networks GXV3651_FHD 用户手册

GXV3651_FHD IP Camera

Firmware 1.0.1.32 Page 20 of 36
Grandstream Networks, Inc. 06/2011

Self-Define DDNS Address

– Self-define the DDNS server instead of using DDNS

ISP Type.

Site Name

– The DDNS name for your device.

DDNS Account/ DDNS Password

– The account and password from the DDNS

Provider.

STUN Server

– If the device is behind a router, a STUN server is needed to help

penetrate the NAT.

4. Click Save to save the changes. You might need to reboot the device to apply all the

changes.

GXV3651_FHD SIP Page

The GXV3651_FHD has the ability to receive phone calls and make phone calls when an

alarm event is triggered through motion detection or alarm input. Register the

GXV3651_FHD to a SIP server to enable the device to make and receive phone calls. To

make outgoing phone calls, the user needs to configure the Phone List properly.

1. From the GXV3651_FHD home page, click on Basic Settings > SIP.

2. Go to SIP Settings Tab.

3. General Phone Settings.

Registered

– The field shows the registration

status of the account with the SIP server.

Unregister On Reboot

– If it‘s checked, the SIP user‘s registration information will be

cleared from the server when the phone reboots.

4. Enter the required information.

Account Name

– The field

configures the SIP account

name.

SIP Server

– The SIP Server‘s IP

address or Domain name

provided by your service

provider.

Outbound Proxy

– The IP

address or Domain name of the

Outbound Proxy, Media Gateway,

or Session Border Controller.

Used for firewall or NAT

penetration in different network

environments. If the system detects a symmetric NAT, STUN will not work. ONLY

outbound proxies can provide a solution for a symmetric NAT.

SIP User ID

– User account information provided by your service provider (ITSP); this is