Intel NSC2U 用户手册

 
TMLPMOUNT41/51/52 series mounts Intel® Communication Rack Mount Servers to 2-

post or 4-post racks. 
 

TMLPMOUNT41 and TMLPMOUNT51 are used for mounting servers on 19-inch wide racks. 
These racks are considered standard EIA (universal hole spacing) racks. 

 
TMLPMOUNT52 is used for mounting servers on 23-inch wide racks. These racks could be 
standard EIA (universal or wide hole spacing) or ETSI (European) racks. 

 
TMLPMOUNT41/51/52 series are designed with a slide-in rail-type system. Although the 

mounts are designed as rails, they are not sliding rails. This means the servers can be slid 
into the racks for installation purpose, but the rails are not designed to support a mounted 

server during service. 
 

 

TMLPMOUNT41 No

1

 

Plastic 

strips

2

 

EIA-Universal 

Not 

included 

Side 

access

6

 

Interference 

TMLPMOUNT51 Yes 

Xylan 

coating

3

 

EIA-Wide or EIA-

Universal

4

 

Included

5

 

Front 

access 

No Interference 

TMLPMOUNT52 Yes 

Xylan 

coating

3

 

EIA-Wide, EIA-

Universal or ETSI 

Included

5

 

Front 

access 

N/A 

 
Notes: 

1.  Extra care must be exercised with TMLPMOUNT41 to securely hold the server with one's hands 

when sliding it out of the rack; otherwise, the server could fall to the ground as it is being 
removed. 

2.  Plastic strips on TMLPMOUNT41 have peeled off in some customer installations.  The result of 

this is that the parts are usable, but the server could have somewhat of a "scrape-in feel" rather 
than "slide in". Also, the rails will fit sloppier, so the side-located chassis securing screws could 

be difficult to align in 2-post installations. Replacement material is available from the plastic 

strip manufacturer. 

3.  Xylan is a tough, low-friction coating similar to Teflon. 

4.  EIA-Wide spacing doesn't have the interstitial hole that is present in EIA-Universal. 

TMLPMOUNT51 contains an adapter bracket to overcome this EIA-Wide issue. 

5.  This component (2U Nut Bar) enables installation of a rail kit into a 1U rack slot when there is 

already equipment installed both above and below that open slot. 

6.  The sides of the server must be accessible when using TMLPMOUNT41 in 2-post racks. 

 

 

 3/28/2008 

v 2.2           17 of 20