Toshiba IK-WR01A 用户手册
22
Installation/Set up
V
iewing
and Operation
Recording
Setting up
Others
Connecting the Camera and Personal Computer by Network (Cont.)
Structure of Connection
The following are two methods of connecting the network camera:
• Use a crossover cable
• Connect with a hub or router
● Using a crossover cable to establish a connection (example)
Network camera
Personal computer
192.168.0.30
LAN cable (crossover)
192.168.0.50
IP address
IP address
Crossover cable is not provided with the product.
● Establishing a connection via a hub or router (example)
Network camera
Personal computer
Hub or router
IP address
192.168.0.30
IP address
192.168.0.50
LAN cable (straight through)
LAN cable (straight through)
Internet
Straight through cable, hub, or router, etc. is not provided with the product.
NOTE
●
You do not need to assign an IP address to a hub.
●
In the case of not using DHCP server, the IP address for the camera is automatically set
to 192.168.0.30 by default. Therefore, set the IP address for your computer to , for example,
192.168.0.50.(When directly connecting with a crossover cable or connecting with a hub,
it should be run in the same network segment).
When using multiple cameras, connect the first camera at IP address 192.168.0.30 and
set different IP addresses (192.168.0.31, etc.) for the second camera and after.
to 192.168.0.30 by default. Therefore, set the IP address for your computer to , for example,
192.168.0.50.(When directly connecting with a crossover cable or connecting with a hub,
it should be run in the same network segment).
When using multiple cameras, connect the first camera at IP address 192.168.0.30 and
set different IP addresses (192.168.0.31, etc.) for the second camera and after.
●
You can also use the LAN port of your broadband router instead of using a hub.
However, when using a broadband router, if the "Connections Settings" is set to
"Automatically by DHCP, " the camera will get the IP address from the router's DHCP
server and may not be 192.168.0.30. For more information, refer to your broadband
router's user guide.
It is also recommended to set the computer’s IP address from the router’s DHCP server.
For more information, read your computer’s user’s guide.
However, when using a broadband router, if the "Connections Settings" is set to
"Automatically by DHCP, " the camera will get the IP address from the router's DHCP
server and may not be 192.168.0.30. For more information, refer to your broadband
router's user guide.
It is also recommended to set the computer’s IP address from the router’s DHCP server.
For more information, read your computer’s user’s guide.