Pelco C1303M-B (5/05) 用户手册

 

C1303M-B (5/05)

5

 

To install the camera module do the following:

1. Refer to Figure 1. Loosen the set screw at the back of the enclosure with the provided 1.5 mm Allen wrench.

 

Loosen Setscrew

 

2. Use the supplied spanner wrench to loosen the back of the camera enclosure (refer to Figure 2). Once the back is loose, use your hands to 

continue to loosen it until it can be removed.

 

Remove Back Cap of Enclosure

 

  To avoid thread damage, carefully remove the back of the enclosure. Never use force to remove the back of the camera 

enclosure.

SET SCREW

CAMERA
ENCLOSURE
BACK

SPANNER
WRENCH