VIVOTEK FE8181V 用户手册
VIVOTEK
User's Manual - 67
Privacy mask
Click
Privacy Mask to open the settings page. On this page, you can block out certain sensitive zones to
address privacy concerns.
■ To set the privacy mask windows, follow the steps below:
1. Click
New to add a new window. A text box will appear allowing you to enter a name for the mask.
2. Use four mouse clicks to mark a square area, which is recommended to be at least twice the size of
the object (height and width) you want to cover.
3. Enter a Window Name and click
Save to enable the setting.
4. Check
Enable privacy mask to enable this function.
► Up to 5 privacy mask windows can be configured on the same screen.
►
►
To delete a mask, use the red cross button and then click on the
Save button.
4x
NOTE:
Sensitivity
Tune the responsiveness of the IR filter to lighting conditions as Low, Normal, or High.
When completed with the settings on this page, click
Save to enable the settings.
If you want to configure another sensor setting for a specific lighting condition in day/night/schedule
mode, please click
Profile to open the Profile settings page as shown below.
Please follow the steps below to setup a profile:
1. Check
Enable and apply this profile.
2. Select the applied mode:
Day mode, Night mode, or Schedule mode. Please manually enter a range
of time through which you want the Schedule mode to apply.
3. Configure Exposure control settings in the folowing columns. Please refer to the previous page for
4. Click
Save to enable the setting and click Close to exit the window.