Canon VB101 用户手册

Router

Router

Viewer PC

Viewer PC

Server

Provide the appropriate 
server as required:

● HTTP (WWW)

● SMTP (mail)

● Syslog (log)

● BOOTP

Call 123-4567

192.168.101.2 is set.

Modem card

Insert modem card.

Viewer PC

Modem

PPP local

: 192.168.101.1

PPP remote : 192.168.101.2

This example shows the VB101 connected to a LAN by Ethernet. In this configuration, videos can

be seen by viewers in the same Ethernet segment as the VB101 and by viewers with access to

that segment.

To send log information such as faults and access statuses by e-mail and save that information to

another computer, an SMTP server or a Syslog server is required.

To automatically assign an IP address for the VB101, a BOOTP server is required.

This example shows the VB101 connected in a dialup environment. In this configuration, videos

can be accessed by viewers which can dial up to the VB101 using a modem.

In this situation, a modem card must be inserted into the card slot (use a recommended modem

card). PPP (Point to Point Protocol) is used as the network protocol. For information on settings,

refer to Chapter 3 (

→ P.41).

This section describes some typical installation modes for the VB101.

Be sure to assign a fixed IP address o the VB101.