American Dynamics 8200-0181-03 用户手册

SPEEDDOME OPTIMA LT PROGRAMMABLE DOME CAMERA 

8200-0181-03, REV. C 

QUICK REFERENCE GUIDE 

2 of 8 

 

The SpeedDome Optima LT programmable dome 
camera provides the following features: 

•  22X optical zoom / 11X digital zoom  

(242X maximum total zoom) 

•  470 lines horizontal resolution 
•  Zoom Adjusted Programming (ZAP) 
•  Auto Focus / Auto Iris 
•  Auto White Balance 
•  Automatic Gain Control (AGC) 
•  Line-lock 
•  Up to 96 presets (system dependent) 
•  Three patterns 
•  Programmable home position  
•  Apple Peel 
•  Dome Flip (rotate 180°) 
•  Power-on functional tests 
•  LED diagnostics 
•  Hard ceiling or pendant mount installation 
•  DirectSet menu commands for specific dome 

functions 

In addition, the dome may be used with the 
Manchester, RS-422 simplex or SensorNet 
protocols. 

CAUTION: The pendant mount option is 
for indoor use only. Do not install the 
SpeedDome Optima LT dome outdoors. 

Although SpeedDome Optima LT does not provide 
on-screen programming via the dome firmware, the 
connected controller may be used to configure 
many settings. These settings include: 

•  Programming presets and patterns 
•  Vertical phase adjustment (V-phase) 

The following table provides additional information 
about the supported controller functions with the 
protocol used. The actual features supported may 
differ for your controller. 

96 (a) 

96 (a) 

64 

3 3  3 

Return to 
Auto Focus/ 
Auto Iris (b) 

Yes Yes  Yes 

Yes Yes  Yes 

Yes Yes  Yes 

No No  No 

 

(a)  The actual number of available presets may 

differ based on the controller used. 

(b)  Pressing the Iris Open and Iris Close buttons 

simultaneously returns to auto focus and auto 
iris mode. 

For specific information about the features 
supported, see the operator's manual for your 
controller.  

Zoom stop settings define how the zoom function is 
partitioned. Depending on the current zoom level, 
the camera will either stop at the first zoom stop 
setting or continue to the maximum zoom setting. 
For SpeedDome Optima LT, the first zoom stop 
setting is 22X (maximum optical zoom). The 
maximum zoom is 242X (maximum digital zoom). 

To switch between optical and digital zoom levels, 
press the Zoom In (Zoom Tele) button until the first 
zoom stop is reached. Release the button for at 
least one second and press Zoom In again to 
continue into the digital zoom range. Zooming 
stops when the maximum zoom is reached.  

Refer to your controller instructions for information 
about the location of the zoom control buttons.